1
**Reel Gaming Machines** **General Chat** / Re: Yellowed plastic cleaning.
« Last post by David Walz on Today at 06:37:13 AM »I threw it in the dishwasher! It came out nice.
Welcome to the NewLifeGames.com message forum!
|
1
**Reel Gaming Machines** **General Chat** / Re: Yellowed plastic cleaning.« Last post by David Walz on Today at 06:37:13 AM »I threw it in the dishwasher! It came out nice.
2
Coin Comparitors and Other Coin acceptors / Re: IGT Double diamond S Plus, coin comparison issue!« Last post by David Walz on Today at 06:30:30 AM »I think most S plus back in '91 started out as $1 machines, and the rest of them were quarter machines. I remember all the casinos in Las Vegas had huge billboards advertising 98% payback on their $1 slots. They were mostly all S or S plus machines. Most didn't have BV's yet, you had to go up to the cage and get a "rack" of silver dollar size tokens with their name on them. OK, how do I identify if this was a $1 slot machine? I want this to be as accurate as possible. 3
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by David Walz on Today at 06:21:04 AM »The plastic after the dishwasher, WOW!
Instead of pop rivets, I am assembling it with screws, nuts, lock washers. 4
IGT S and S-plus Reel Games / Re: Unusual game it s plus« Last post by Stayouttadabunker on Today at 05:20:47 AM »Could you post a photo of your award glass?
5
WMS Williams Video / Looking for 2 BB2 CPU doors.« Last post by mikeyg on Today at 05:18:45 AM »I have 2 BB2s that I got from Gamblers Oasis without CPU doors.
Anyone know where I could find these. Looked online with no joy... Thanks. 6
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Stayouttadabunker on Today at 05:01:44 AM »yes...I was changing my Reply to 1270 while you posted.
7
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by kmarrocco on Today at 04:58:59 AM »Thank you for the quick reply. The battery on the MPU is a new one, it measures around 3.2V. But there are no LEDs illuminated on the MPU when it is powered. I can try reseating the power supply behind the reels and the MPU chips.
8
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Tilt on Today at 04:57:29 AM »044 is for GK/I-games. 1270 is the enhanced MPU for S2000's.
9
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Stayouttadabunker on Today at 04:46:20 AM »Look inside the enclosure where the MPU slides into.
On the back wall inside, there is the backplane board that the MPU plugs into when you slide it in. Maybe take a photo of that circuit board inside, and we can tell you which version MPU replacement you need? The two large, long white connector board headers are the most important ones to take note of and pretty determines what MPU is compatible with the backplane board. Some versions use a long header on top, and a shorter header on the bottom?.... you'll see when you look inside. If they're different length headers (Long & short one), I would recommend what everyone calls a "504" MPU. If the backplane headers are both long ones, then you would need an "1270 Enhanced" MPU. I sort of outlined the MPU enclosure box with some yellow rectangles. Also, I've attached a picture of a 504 MPU...look at the connectors on the bottom of the board. Click on any photo to enlarge if needed...>>> 10
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Heikka on Today at 04:02:36 AM »The one on right has wrong belly glass. Themes are triple five times pay (3cm) and five times pay (3cm)
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |