New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: bb1 conversion touchscreen wiring  (Read 4206 times)

0 Members and 1 Guest are viewing this topic.

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
bb1 conversion touchscreen wiring
« on: November 28, 2015, 08:23:44 AM »
I am installing this 22" screen in my bb1 Monster Jackpots project & was wondering if anyone knows how to run the wires for the touchscreen?

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
Re: bb1 conversion touchscreen wiring
« Reply #1 on: November 28, 2015, 08:24:41 AM »
Heres a pic of the plug.

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
Re: bb1 conversion touchscreen wiring
« Reply #2 on: November 28, 2015, 10:09:47 AM »
Heres a pic of the touchscreen wires behind the cover. I know I use the ground wire, just not sure of the other 2 wires I need to run to the backplane.

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
Re: bb1 conversion touchscreen wiring
« Reply #3 on: November 28, 2015, 11:11:38 AM »
Heres a pic of the touchscreen wires behind the cover. I know I use the ground wire, just not sure of the other 2 wires I need to run to the backplane.
So I came up with Blue = Ground, Red & Brown for my input & output . Does this sound right? I don't want to fry my touchscreen  :EmoticonHelp4:

Offline rickhunter

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7515
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: bb1 conversion touchscreen wiring
« Reply #4 on: November 29, 2015, 10:52:05 PM »
Here's my home made harness for my bb2 conversion.  I can make you one if you wish.  If you are handy making them, here is the pinout for the one I built and use.
Micro Fit         MiniFit

Pin 1     to     Pin  1
Pin 2     to     Pin  2
Pin 3     to     Pin  3
Pin 4     to     Pin  4
Pin 5     to     Pin 10
Pin 6     to     Pin 10
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
Re: bb1 conversion touchscreen wiring
« Reply #5 on: November 30, 2015, 07:05:44 AM »
Here's my home made harness for my bb2 conversion.  I can make you one if you wish.  If you are handy making them, here is the pinout for the one I built and use.
Micro Fit         MiniFit

Pin 1     to     Pin  1
Pin 2     to     Pin  2
Pin 3     to     Pin  3
Pin 4     to     Pin  4
Pin 5     to     Pin 10
Pin 6     to     Pin 10

Thank you, I ended up just using the red & brown (sig in & out)wires & the blue ground wire. When I get a chance I'll have to make one of these harnesses to clean up my install.

Offline bpracer

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 709
  • Reputation Power: 50
  • bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: bb1 conversion touchscreen wiring
« Reply #6 on: November 30, 2015, 08:40:36 AM »
Here's my home made harness for my bb2 conversion.  I can make you one if you wish.  If you are handy making them, here is the pinout for the one I built and use.
Micro Fit         MiniFit

Pin 1     to     Pin  1
Pin 2     to     Pin  2
Pin 3     to     Pin  3
Pin 4     to     Pin  4
Pin 5     to     Pin 10
Pin 6     to     Pin 10


Rick,
If you get a chance and are willing to make one up let me know, I will need one shortly.

Drop me a PM with payment information.

Thanks!

Offline rickhunter

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7515
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: bb1 conversion touchscreen wiring
« Reply #7 on: November 30, 2015, 10:22:17 AM »
Interesting, if you only used tx/rx and ground, where is the touchscreen controller getting power from?
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline Haywire Slots

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 308
  • Reputation Power: 30
  • Haywire Slots Is working their way up.Haywire Slots Is working their way up.Haywire Slots Is working their way up.
  • Gender: Male
  • NLG
    • Haywire Slot Machines of Houston
Re: bb1 conversion touchscreen wiring
« Reply #8 on: November 30, 2015, 05:43:41 PM »
Interesting, if you only used tx/rx and ground, where is the touchscreen controller getting power from?
The main power wire going into the monitor also powers the touchscreen control board.

Offline rickhunter

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7515
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: bb1 conversion touchscreen wiring
« Reply #9 on: November 30, 2015, 11:48:24 PM »
Interesting, the ceronix monitor I purchased requires the 24 volt and 12 volt lines, and the power to touchscreen.  Now that I look closely at a pair of OEM monitors I later acquired, only the 12v power is required for those.  The touchscreen cable has the 12volts wired into it, and it seems to just be redundant then.  I will try and remove the power pins from the harness to see if I get a touchscreen error one of these days.
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline Eddiie

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 571
  • Reputation Power: 45
  • Eddiie Might someday be someone...Eddiie Might someday be someone...Eddiie Might someday be someone...Eddiie Might someday be someone...
  • Gender: Male
  • NLG
Re: bb1 conversion touchscreen wiring
« Reply #10 on: November 01, 2017, 02:19:34 AM »
Here's my home made harness for my bb2 conversion.  I can make you one if you wish.  If you are handy making them, here is the pinout for the one I built and use.
Micro Fit         MiniFit

Pin 1     to     Pin  1
Pin 2     to     Pin  2
Pin 3     to     Pin  3
Pin 4     to     Pin  4
Pin 5     to     Pin 10
Pin 6     to     Pin 10

Thank you, I ended up just using the red & brown (sig in & out)wires & the blue ground wire. When I get a chance I'll have to make one of these harnesses to clean up my install.

For those that do not know where pin 1 is..

On the monitor, looking at the rs232 connector, bottom-left pin is pin 1.
On the connector coming from the backplane / bulkhead, J4, Pin 1 is the row above/below the red wire.  The row with the red wire has a No Connection (NC) pin, then three grounds.


Offline Melissarmdlm

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 152
  • Reputation Power: 12
  • Melissarmdlm New User has no influence.
  • Gender: Female
  • NLG
Re: bb1 conversion touchscreen wiring
« Reply #11 on: November 02, 2017, 05:36:52 PM »
Any of these assembled harneses around? I'm having issues finding the microfit Molex plug.

Offline rickhunter

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7515
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline Eddiie

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 571
  • Reputation Power: 45
  • Eddiie Might someday be someone...Eddiie Might someday be someone...Eddiie Might someday be someone...Eddiie Might someday be someone...
  • Gender: Male
  • NLG
Re: bb1 conversion touchscreen wiring
« Reply #13 on: November 04, 2017, 11:45:21 AM »
How about the power connector and pins?  :)

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal