New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1]   Go Down

Author Topic: Making progress on my set of Bally V32's  (Read 687 times)

0 Members and 1 Guest are viewing this topic.

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Making progress on my set of Bally V32's
« on: July 26, 2020, 12:01:37 PM »
Big thanks to all who have helped me so far...


I was finally able to move everything down to the basement last night and my wife and I play our official first games. I still have some things on the to-do list but everything is coming together slowly but surely.


I had picked up (2) brand new 5 button panels on ebay so I swapped both new panels on the games yesterday. Cash spin was straight forward in just transferring over the button inserts. Roulette was a bit more work since it originally only needed the spin / service / collect buttons... however I wanted to have the option to play different games down the road in that cabinet so I installed the 5 button panel, blanked out the buttons I wouldn't need right away and made a new graphic for the larger spin button.




IMG-8462" border="0


IMG-8461" border="0




And here they are in there final home:


IMG-8467" border="0


IMG-8468" border="0




still have a few things to sort out:


1. Printer in Roulette gives me a communications error. Suspect it may not be the correct printer / firmware.
2. Sound Quality on Roulette is a bit distorted, I think the 6" speaker in the belly may need replacing.
3. Looking for Reel Money Belly Artwork to complete the cabinet.
4. Ordered TiTo kits that should arrive soon but need to get my Roulette printer issue sorted first.




More (novice) questions to follow...




« Last Edit: July 26, 2020, 04:03:08 PM by RetroGamerJP »
Logged

Offline rickhunter

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7524
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: Making progress on my set of Bally V32's
« Reply #1 on: July 26, 2020, 01:09:02 PM »
Power up while pressing the feed button on the printer.  The printer will print a diagnostic page that will say what firmware is installed on it.

I like your custom inserts, what material did you use to make those up, did you print on an inkjet printer?  I made up some Generic Bally logos for the belly and printed them on photo paper.  It works fine for the most part, would love to get it professionally printed with correct translucency, so the black doesn't turn dark grey by the backlight and the red looks bright.
Logged
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Re: Making progress on my set of Bally V32's
« Reply #2 on: July 26, 2020, 04:02:14 PM »
Thanks Rick - here is the printout from the self test ... what the best way for me to go about confirming I have the correct firmware? and if its incorrect, is it easy to flash the correct firmware? Or am I better to try and find a different printer that already has the correct version?


Gen2-Print" border="0




For the Roulette button inserts it is actual 3M satin vinyl that I cut out on my plotter...


For my missing Belly graphic on the other machine, I did order some color transparency film to do some tests but I will l most likely have to take to a sign shop to get properly printed.
Logged

Offline rickhunter

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7524
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: Making progress on my set of Bally V32's
« Reply #3 on: July 26, 2020, 05:05:02 PM »
Your printer has a bally compatible firmware.  So the error is due to something else.  What printer do you have selected in the cabinet setup option?
Logged
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Re: Making progress on my set of Bally V32's
« Reply #4 on: July 26, 2020, 05:31:04 PM »
Really appreciate the insight here, thank you!  ...  I selected the future logic option in the setup ... followed the game clear / setup video here (https://www.youtube.com/watch?v=XBYCJSUZR9k) ... I went through the process twice just in case I missed something but in both instances, I get the "Voucher printer com error" after setting everything else up. In the printer setup screen there is a test print button and when i press it i get nothing ... machine has California - tribal installed.


Here is a shot of my harness ... the green is what it currently connected. The other cables looked to be for the LED control and non essential options but perhaps I don't have it fully connected as required?

IMG-0266" border="0
Logged

Offline rickhunter

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7524
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: Making progress on my set of Bally V32's
« Reply #5 on: July 26, 2020, 05:39:07 PM »
The others you don't need to connect.  You may just have a bad printer.  Does your other machine also have the same type printer?  You could move the printer over to see if the error goes away.
Logged
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Re: Making progress on my set of Bally V32's
« Reply #6 on: July 26, 2020, 05:42:22 PM »
My other one has a working Ithica EPIC 950 ... was thinking about moving it over and going through the setup again to see if I could get that one to work in the other cabinet and if so, maybe trying to find another one of those. Do you see any reason that wouldn't work?
Logged

Offline rickhunter

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7524
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: Making progress on my set of Bally V32's
« Reply #7 on: July 26, 2020, 07:09:18 PM »
You can use either printer brand.
Logged
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Re: Making progress on my set of Bally V32's
« Reply #8 on: July 27, 2020, 10:48:17 AM »
Thank you! ... I am going to attempt the swap and if I can get the 950 working in the other machine, I will track down another one of those printers. fingers crossed.
Logged

Offline RetroGamerJP

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 23
  • Reputation Power: 1
  • RetroGamerJP New User has no influence.
  • NLG
Re: Making progress on my set of Bally V32's
« Reply #9 on: July 28, 2020, 04:21:36 PM »
Rick - I was able to get my 950 working in my other machine so I ordered a duplicate one today. Thanks again for the guidance!
Logged
Pages: [1]   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal