POG questions

[Nepa Coin Op]

I have a POG board here i needed to repair to get to boot. C37 which looks like it may have been a batt or super cap is missing .... What should it be a cap or batt??? with this having a RTC at U3 does it need that batt anyway ??


Next question ... as far as using LCD monitors with these.... which converter do I need I built one of these once before and used the red converter board but the SW chip was different to work with the POG.. I cant find his contact info where I got that anymore...


Thanks guys

[asgard]

C37 is a cap. I usually use a VGA adapter, not a converter but I think it depends on your monitor choice. I use generic 3M microtouch lcd monitors.

[Nepa Coin Op]

Would you happen to have the value of that cap ? I have another board here but it's missing off that one too ...monitor I am using is a LCD from a flat screen megatouch .

[asgard]

I don't have a board nearby, I'll have to go into a machine tomorrow and look at the cap. If the megatough monitor is 3M Micro touch compatible then it should work.

[Nepa Coin Op]

Should see the controller no prob ... getting the correct cap on there and a vga converter/adapter that gives me a clear pic

[asgard]

Here are the specs and a link to the capacitor : .33F 5.5V radial super cap


https://www.ebay.com/itm/1-PCs-CAPACITOR-SUPER-33F-0-33F-5-5V-SUPERCAP-Radial-Super-Cap/152202675559?hash=item236ffc8567:g:o48AAOSwV0RXrT9s

[Nepa Coin Op]

Here are the specs and a link to the capacitor : .33F 5.5V radial super cap


https://www.ebay.com/itm/1-PCs-CAPACITOR-SUPER-33F-0-33F-5-5V-SUPERCAP-Radial-Super-Cap/152202675559?hash=item236ffc8567:g:o48AAOSwV0RXrT9s

thank you




can you show me which video converter you are using ??


thanks

[asgard]

I use this monitor :


https://www.alibaba.com/product-detail/Open-Frame-19-Inch-Touch-Screen_60723457598.html?spm=a2700.7724857.main07.22.592c4aceWqNaI9
https://www.alibaba.com/product-detail/Open-Frame-19-Inch-Touch-Screen_60723457598.html?spm=a2700.7724857.main07.22.592c4aceWqNaI9



And this adapter :


https://www.ebay.com/itm/CGA-to-VGA-pinout-adapter-Female-HD-15-Wintouch-POG/292233817886?hash=item440a7e2f1e:g:ytIAAOSwLQpZp4g9

[Nepa Coin Op]

I use this monitor :


https://www.alibaba.com/product-detail/Open-Frame-19-Inch-Touch-Screen_60723457598.html?spm=a2700.7724857.main07.22.592c4aceWqNaI9
https://www.alibaba.com/product-detail/Open-Frame-19-Inch-Touch-Screen_60723457598.html?spm=a2700.7724857.main07.22.592c4aceWqNaI9



And this adapter :


https://www.ebay.com/itm/CGA-to-VGA-pinout-adapter-Female-HD-15-Wintouch-POG/292233817886?hash=item440a7e2f1e:g:ytIAAOSwLQpZp4g9

only last thing I need is the touch cable.... would it be possible for you to get me the pinout? I have an extra DBA cable here if I knew the pinout I will put the Dsub conn on it for touch and Ill be good to go to assemble this ...i can order a cable but would like to have this operational long before that would get here
im lucky enough to have the rest of the stuff here


thanks again

[asgard]

I think this is the red converter board you are looking for :


https://www.alibaba.com/product-detail/converter-board-for-POG-game-machine_60496382087.html.]https://www.alibaba.com/product-detail/converter-board-for-POG-game-machine_60496382087.html.[/url]

[asgard]

The touch cable I use has to different ends, RS232 (serial) to the monitor and RJ45 to the board. Let me know if that's the one you need the pin out for. I will look in a machine tomorrow and let you know. It is not standard, the cable has been modified for the POG.

[Nepa Coin Op]

The touch cable I use has to different ends, RS232 (serial) to the monitor and RJ45 to the board. Let me know if that's the one you need the pin out for. I will look in a machine tomorrow and let you know. It is not standard, the cable has been modified for the POG.

yep thats it.... i have everything here to build that too just need pinout end to end


thx

[asgard]

Sorry for the delay but I have been trying to post a pic from photobucket explaining what to do but it isn't working out. I'm going to try and explain it without diagrams. The serial port cable is numbered so that part is easy but the RJ45 is not. Holding the RJ45 end with the connection part pointing up and the clip away from you, we are going to number 1 to 8, left to right.


RJ45 pin 5 to serial port #2
RJ45 pin 3 to serial port #3
RJ45 pin 7 to serial port #5


Those 3 connections are all you need.

[Nepa Coin Op]

Thank you