New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: bally e2000 code 41  (Read 2259 times)

0 Members and 1 Guest are viewing this topic.

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
bally e2000 code 41
« on: March 24, 2017, 07:15:11 PM »
would this be a lube issue ?
machine will play for hours then throw code 41 a few times then play for a while again
another thing happening is if i win machine sits and waits for hopper to pay
wiggled fuse and connector no help
turn machine off and back on it pays out and can resume play
any ideas would be helpful
thanks in advance

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: bally e2000 code 41
« Reply #1 on: March 24, 2017, 07:42:55 PM »
Most likely a lube job but also go to test 5 and tap your first reel reader and see if the reading changes on your display.
Sometimes it is a dirty plug or a weak lamp on the reader.

As far as the hopper problem try re-seating the plugs on the top of your I/O board.
But it could also be capacitor C40 on the I/O board is weak or your hopper control board has a problem.
Someone here sells replacement hopper control boards without all of the security components Bally put in.
You may want to try one of those to see if the problem goes away.
Let them that don't want any, have memories of not getting any.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: bally e2000 code 41
« Reply #2 on: March 24, 2017, 10:38:38 PM »
You can try moving the reel reader control board from the first reel to the second or third reel to see it the problem moves with the reader. If it does I can rebuild it for you.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
Re: bally e2000 code 41
« Reply #3 on: March 26, 2017, 02:20:30 PM »
I tried swapping reader cards still code 41
if i do test 8 reels work fine but will only let me put coins in once
hit test back to 8 and spin again doesn't pay out in test 8 either, unless i  shut power off and back on then it pays
if i do hopper test spits out 10 coins as it should
would bad connections on the ribbon cable from i/o to mpu possibly be the culprit?




Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: bally e2000 code 41
« Reply #4 on: March 26, 2017, 03:37:48 PM »
I would think there would be a lot more wrong if there was a bad pin on the ribbon cable.
IC U9 on the I/O board controls the hopper and turns on the reel reader bits, it is enabled by IC U10.
Try swapping U10 and U15, they are in sockets, and see if that makes any difference.
Let them that don't want any, have memories of not getting any.

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
Re: bally e2000 code 41
« Reply #5 on: March 26, 2017, 05:27:07 PM »
same thing no change

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: bally e2000 code 41
« Reply #6 on: March 26, 2017, 06:42:47 PM »
Is the #1 reel latching in or just free spinning?
If it is not it could be a bad or half waving triac that energizes the reel solenoid for reel 1.
Let them that don't want any, have memories of not getting any.

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
Re: bally e2000 code 41
« Reply #7 on: March 26, 2017, 07:52:02 PM »
soon as you pull handle reels all spin and errors out so no reels stop
but in test mode 8 reels spin and stop fine
will only play 1 time
hit test back to 8  play again spins and stops fine  over and over again works fine but just 1 time
never pays out in test 8
even without a win on reels have  to go back to test 8 again   to play again

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: bally e2000 code 41
« Reply #8 on: March 26, 2017, 08:08:05 PM »
This error can occur when you have a bad door switch.
When you go into test... say 5.... and close the door do you get a 50 code on the door and test 5 goes away?
Do you also have a door cam on the back of the key that opens your door, a round cam that actuates a switch?
Bypass it by cutting the two wires connected to it and tying them together.
Let them that don't want any, have memories of not getting any.

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
Re: bally e2000 code 41
« Reply #9 on: March 26, 2017, 11:14:06 PM »
checked the door close switch no voltage used to be 5 v there
chased all thru the wiring someone had a crimp connector that lost connection
now have 5 v at the switch and all thru the door coming from j3 pin 3 on i/o board
the other side of the switch a grey with green stripe goes to a molex connector and turns to ground after running  all thru the machine
still the same though
i did get it to play a couple times but it would only play once then i had to open door hit test 1 insert coin would light again i think that worked twice before it would just 41 out every time again
took a small flat blade and spread the pins in the molex's on reel mech
didn't help
still in test 8 spins fine every time
is it supposed to pay out in test 8?

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: bally e2000 code 41
« Reply #10 on: March 27, 2017, 01:08:47 AM »
No it will not payout in test 8.. That will simulate a pull with just the winning amout showing in the win meter.
Is your doors hinge switch working correctly? I check mine by putting the machine in a test mode. Then slowly close the door. You should see the machine come out of the test mode and display the 50 000 in the win meter.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline windman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • windman New User has no influence.
  • NLG
Re: bally e2000 code 41
« Reply #11 on: March 27, 2017, 07:12:57 AM »
i have4 the door on a toggle switch
can hear door open relay fire and door open light goes on win meter working
gonna clean relay see if that helps

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal