21
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display
« Last post by sixcardmark on Yesterday at 02:07:14 PM »Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.Can't do that - DVI has to be primary TOP screen. Run top to DVI, curve to DP. Curve screen is not primary, Top screen is primary on a curve machine, bottom screen is primary on all other setups. The reason top is primary on curve is because you can't program machine on the curve monitor.