New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => CEI and Cal Omega Video Poker Games => Topic started by: SolidSilver on April 09, 2014, 01:47:13 PM
-
Topic started by: Yoeddy1 on September 09, 2009, 10:51:03 PM; Thread consolidated & transferred from old site
Title: New CEI Toy!!
Post by: Yoeddy1 on September 09, 2009, 10:51:03 PM
I know this isn't an IGT PE+, but for 150 bones and in perfect working order and condition, I couldn't go wrong. Man was it filthy when I got it home. But after hooking up the compressor and blasting it out, the cleaning solutions really made this shine! It's a nickel machine and a lot of fun to play.
Any words of wisdom from the small CEI community? Wish I could find a manual for this thing.
-
Title: Re: New CEI Toy!!
Post by: dormi on September 10, 2009, 04:13:37 PM
________________________________________
Look in submit a new file section CEI 23.9.pdf for a manual. Have schematics, will post them if anyone is interested.
[MODERATOR’s NOTE: The current location for posting large document such as these is Downloads: http://newlifegames.com/nlg/index.php?action=downloads (http://newlifegames.com/nlg/index.php?action=downloads)]
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 11, 2009, 03:25:58 AM
Thanks for the heads up dormi.
When I cash out or when credits are being counted, it sounds like there's a clicking sound like a relay or something. Any idea what this could be?
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 15, 2009, 12:56:41 AM
So the clicking noise is bugging me. Only when winning credits or each time a credit is bet. i wonder if a bell or something is missing? The speaker is working fine however. Perhaps this is how this machine was designed back then.
________________________________________
Title: Re: New CEI Toy!!
Post by: CaptainHappy on September 16, 2009, 04:15:12 AM
Most likely the clicking sound is a mechanical meter / counter. Not sure on this machine though. There are some people here that have discussed disabling these meters on other machines. :79- :103-
CaptainHappy :nlg- ADMIN
________________________________________
Title: Re: New CEI Toy!!
Post by: TZtech on September 16, 2009, 06:16:44 AM
That would be my guess as well. just trace the wiring back from the meters to the controller board and unplug them (Machine power off)
Start it up and see if you get any errors. Some machines do check for the meter board. If its the case here i dont think it will be to elobarte considering machines age. Mostly there a 2 points that are connected electrically on the meter board. Just meter them out and jump the 2 points back on the connecter where the meter harness plugs in to.
Regards, Ian
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 16, 2009, 06:48:19 PM
TZtech...yep...looks like it is the counter that makes the sound.
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 16, 2009, 07:15:55 PM
I'm really wondering if the fan cable can be disconnected? I'm sure it's on because of the heat that is generated by the monitor. It's not overly noisy, but as I'm still in the process of cleaning this machine, 20 plus years of nicotine blowing around makes my wife unhappy. :(
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 23, 2009, 12:12:38 AM
Any ideas what the Audio board connector is for? I'm getting sound out of the unit? Any idea if there are volume settings anywhere? The manual was very helpful, but I didn't see anything around sound. Thanks!
________________________________________
Title: Re: New CEI Toy!!
Post by: stayouttadabunker on September 23, 2009, 09:03:44 AM
I really like the way they white-lettered stenciled what each header is for on the Omega motherboard...neat!
Use lots of paper towels and windex to clean out your machine will get it smelling better....;add a nice car/room air freshener packet inside too! They comes in various scents...
The "Audio board connector" is for sound...LOL...nothing else...
It should be connected some how to your speakers...could be for an auxiliary speaker too
uh, check the MPU and see if there's any round dial to adjust your volume...; if not, then it's in the options settings perhaps....
________________________________________
Title: Re: New CEI Toy!!
Post by: stayouttadabunker on September 23, 2009, 09:11:31 AM
I see a couple of white dials in the back on the horizontal MPU board...; betcha one of those is for your volume!
-
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on September 23, 2009, 09:01:47 PM
Right on!!! The dial on the left turns the monitor off. There are 4 dials on the right side which allow the background color on the screen to be Red, Green, Blue, Black or a mix thereof. The dial on the far right back corner is for volume.
This is a REALLY cool machine! I pulled the board out the other night too...can't believe I missed these!
________________________________________
Title: Re: New CEI Toy!!
Post by: stayouttadabunker on September 23, 2009, 09:03:32 PM
I didn't...and the machine is at your house.... !
I'm so happy you figured it out and got it going like the way you want to!!!
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on October 07, 2009, 11:02:21 PM
________________________________________
Here's a video of it in action:
[MODERATOR’S NOTE: Video expired on you tube and was not transferrable]
________________________________________
Title: Re: New CEI Toy!!
Post by: Yoeddy1 on November 17, 2009, 12:00:43 AM
Quote from: Yoeddy1 on September 16, 2009, 07:15:55 PM
I'm really wondering if the fan cable can be disconnected? I'm sure it's on because of the heat that is generated by the monitor.
I also posted this question in the general video gaming board. Any thoughts on this?
________________________________________
Title: Re: New CEI Toy!!
Post by: CaptainHappy on November 17, 2009, 12:06:46 AM
Yoeddy1,
No need to post in multiple areas, most people read all posts on the forum, and it is better to have your question in only one place.
CaptainHappy :nlg- ADMIN
________________________________________
Title: Re: New CEI Toy!!
Post by: KirkLasVegas on November 17, 2009, 08:47:36 AM
The fan is in there for a good reason. While it might not seem hot in there, without any cooling it will become quite warm in there. heat is a killer of electronic parts, dries out plastic and nylon parts.
Disconnecting the fan in my opinion is a *BAD IDEA*.
Instead....do this. Pull that fan out and measure it. Look online for a NEW one. New fans are a lot quieter than the older ones.Chances are it's bearing noise because it has run dry. Most fans can be disassembled and cleaned out.
You might find that after cleaning it out and lubricating it with OIL..NOT WD-40 (something like 3 in 1oil) AKA sewing machine oil the bearings will quiet down. If the fan is in the top of the machine it MUST exhaust or blow outward. This will pull cool air in from the bottom and up thru the machine.
Be careful on voltages, i have seen 5 volt,12 volt 24 volt and 120Volt fans in machines. Some are run from the DC supply, others from the AC mains.
Kirk