New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Knuckles on October 16, 2017, 03:42:33 PM
-
Is there some special trick or other options for clearing memory? The 97 clear chip doesn't do anything. Ordered from eBay - seller says it's been tested and good. Anything I could be missing?
I put chip in and power up - no lights on board - nothing happens at all.
Thanks!!
-
Are you putting it in the socket the SB chip is normally in? Are you getting it oriented correctly with the notch in the chip? You posted inder S+ topic heading. Is your machine an S+ or S2000?
-
Should be an S2000, if it has lights. I think Cowboy is right. Check where and how the chip is in.
-
Took SB chip out - put clear chip in that socket oriented correctly with all pins seated
-
Is it a 50x mpu or 1270 enhanced? IVC00097 will usually only give you one amber light on enhanced board & may take a while to do so. IVC00224 is recommended along with KEY00045. Post a pic of your mpu. Enhanced with R board will use RBK00001.
-
Here's a picture
-
A 97 should work on that if it's a good chip. A 224 will also do the job.
-
I ordered the 97 from eBay. Maybe it's no good.
-
I would suspect a bad chip
-
Just got the new 97 chip today. It worked and my slot machine is up and running perfectly!
-
Great! Glad you got it running