New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: foster on February 23, 2014, 01:52:39 AM

Title: S2000: Disconnecting the Hard or Physical Meters
Post by: foster on February 23, 2014, 01:52:39 AM

This is how to quiet the physical meters
Many thanks to CaptainHappy

Do not just unplug them, doing so will cause a Meter Disconnect tilt.

Parts list:
Short piece of Wire or the like to act as a jumper

Unplug harness going to the meters
Locate pins 9 and 10 in the connector
Pin 1 is designated by a small arrow on the connector - yes it is small.
the wire colors you are concerned with are:
 9 Brown with gray stripe
10 Black with orange stripe

Insert a jumper between pins 9 and 10 in the harness
Apply a bit of electrical tape to hold the jumper in place or you might get random meter disconnect tilts.
You can also cut the two wire and splice if you so desire.

Title: Re: S2000: Disconnecting the Hard or Physical Meters
Post by: SlotMechanic on March 12, 2014, 04:29:42 PM

 I just used a small paper clip... It fit real nice into the connectors... I put a peice of electrical tape as to what foster said....works great... No more constant noise.