New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: IGT S+ wba13 - holds bills for 4 secs - then spits them out  (Read 2141 times)

0 Members and 1 Guest are viewing this topic.

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
IGT S+ wba13 - holds bills for 4 secs - then spits them out
« on: April 25, 2017, 08:45:29 AM »
Installed a wba13 into an S+  The issue is bills are not accepting - holds them for 3 secs or so and spits them back (DOLLAR BILL which should take)
Using known good transports - bill heads - cash box - 10mhz and 16mhz boards - using SP1271 - different motherboards)
The settings are 5/0  for the to credit - used a set15 and a set90
the limits 7 1,2,3,5 are 1000   8 is 1
What i read from older threads regarding holding bill for a few seconds indicates settings. 
« Last Edit: April 26, 2017, 08:56:16 AM by GOS »

Offline shortrackskater

  • Mark
  • NLG Site Administrator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3945
  • Reputation Power: 263
  • shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #1 on: April 25, 2017, 08:58:49 AM »
When in settings mode, did you go to 9 and change it from 0 to 1?
Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #2 on: April 25, 2017, 10:23:05 AM »
9/1 YES - during SET. 
« Last Edit: April 25, 2017, 12:22:44 PM by GOS »

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #3 on: April 25, 2017, 01:42:24 PM »
Barry,  does the insert coin light flicker as well?? if so then try changing switch # 2 on the WBA,  I am doing this from memory, so I think its #2, it could be #1 or maybe that only applies to PE+.  anyway try it, that changes the IDO setting on the WBA to match the game protocol.

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #4 on: April 25, 2017, 02:22:23 PM »
I will try BUT - why would the wba work in another game with the same boards - bv etc? 

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #5 on: April 25, 2017, 02:42:51 PM »
If that's the case then I would suspect the wba power supply , it has the I/O board that passes the info from the wba to the cpu.  check the connector that the mates up with the connector under the reel shelf, then check the connection at the motherboard. 

the data path is form the wba to the I/o board, out of the wba power supply to the connector, from the connector to the connector on the mother board, from that connector to the cpu board. and reverse going back to the wba.  some thing is not passing the information!


Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #6 on: April 25, 2017, 02:54:45 PM »
that makes a lot of sense - since that is the only area not covered by my switching out parts.  thank you

 

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #7 on: April 25, 2017, 07:08:15 PM »
I'm going to ask a question that's going to make me sound stupid.. :arrowthruhead: It's not going to be my first or last time.. :fryingpan:

I didn't know that you could run a WBA13 in a S+ machine. I thought you could only run a WBA11 or WBA12 in them. I know they are interchangeable on the S2000 machines.. I know the difference between a 12 & 13 is that the 12 if flashed, where the 13 is Eprom based.. I didn't think you could run 3.80 on the S+, only the S2000?  Reason I'm curious is that I have a S+ Haywire with a DBV200, but I have a WBA setup in a different S+ cabinet that I was thinking of swapping into the Haywire machine..
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #8 on: April 26, 2017, 08:55:55 AM »
right on JIM - there was a broken wire in the harness - hard to see - only after i removed the bv housing.  HOWEVER!!!! - old topic still rears its ugly head - I cannot get 16MHZ boards to work.  10mhz work fine.  I will close out this thread but I am out of 10mhz boards and really would like to find a use for all the 16s I have. 

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #9 on: April 26, 2017, 10:08:12 AM »
Barry,  glad you got it working!    I have a S+ top Dollar, it runs a 16 meg board and has a WBA installed, and accepts the bills. it is using an  SP 1024.   


Gary:  you can't run a 3.80 from a S-2000, its ID024, however you can use an S+ 3.75 with a IDO23, flashed or eprom!   



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #10 on: April 26, 2017, 10:23:29 AM »
game is a Haywire using SS3732 and SP1146  on 16mhz - not accept bills - changing to a 10mhz - using the SS3732 and SP1274 accept bills. Nothing changed - no set - same parts.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ wba13 - holds bills for 4 secs - then spits them out
« Reply #11 on: April 26, 2017, 11:47:27 AM »
Gary:  you can't run a 3.80 from a S-2000, its ID024, however you can use an S+ 3.75 with a IDO23, flashed or eprom!   


Thanks Jim. 3.75 ID023 will allow me to run everything except the new $100 bills?
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal