New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Comparitor Slide Stuck  (Read 2870 times)

0 Members and 1 Guest are viewing this topic.

Offline jim249

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • jim249 New User has no influence.
  • NLG
Comparitor Slide Stuck
« on: February 04, 2018, 02:00:05 PM »
I tried to replace the quarter in my comparitor, CC16D but the slide is stuck, won't move. Any ideas? I don't want to force it and break something. Thanks for any help!

Offline Badbaud

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Comparitor Slide Stuck
« Reply #1 on: February 04, 2018, 02:13:40 PM »
Turn it over and look at the back and make sure it didn't fall out of it's groove.
Let them that don't want any, have memories of not getting any.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Comparitor Slide Stuck
« Reply #2 on: February 04, 2018, 05:05:25 PM »
There is supposed to be a spring on the back that pulls the sliding cover to the left so that it covers the sample coin (as much as possible, depends on the size of the coin or token). Turn the coin comparitor over and look on the back to see if the spring is there. One time I had one that someone had removed the spring and put a piece of wire in its place, permanently holding the slide cover in place.

If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline jim249

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • jim249 New User has no influence.
  • NLG
Re: Comparitor Slide Stuck
« Reply #3 on: February 04, 2018, 06:45:32 PM »
Thanks for the replies. I watched a video on how to get it out but mine won't budge. Going to leave it for the tech who sold me this machine.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Comparitor Slide Stuck
« Reply #4 on: February 04, 2018, 07:51:43 PM »
When the tech takes it out ask him to show you, just in case you ever need to do it in the future.

Does it look like the one in the photo below?

If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline jim249

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • jim249 New User has no influence.
  • NLG
Re: Comparitor Slide Stuck
« Reply #5 on: February 04, 2018, 08:03:48 PM »
The coomparitor looks the same but the overall picture looks much different. Mine is in a S2000 machine.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Comparitor Slide Stuck
« Reply #6 on: February 04, 2018, 08:23:24 PM »
That's fine, it's just a photo grabbed from another repair discussion, I wanted to see if you have a coin comparitor or a simple coin mech. I thought the comparitor on your machine would be held in place by 4 snap posts, one on each corner of the comparitor. You just pull each corner forward to pop it loose. But maybe yours is mounted differently.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Comparitor Slide Stuck
« Reply #7 on: February 04, 2018, 08:34:57 PM »
Check the screw that's circled in Red.. If it has been tightened too tight, you won't be able to slide the comparitor part over to insert the sample coin.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline jim249

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 17
  • Reputation Power: 1
  • jim249 New User has no influence.
  • NLG
Re: Comparitor Slide Stuck
« Reply #8 on: February 05, 2018, 10:22:35 AM »
Thanks for all the replies! I finally got it out by removing one corner at a time. The screw was tight and so I loosened it. It was still sticky and hard to slide so I put a bit of silicone on it and it moves much better now but still sticky. My guess is that once a coin is put in, it is never bothered with again. It may have been bad since day one. Thanks again all!!!!

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Comparitor Slide Stuck
« Reply #9 on: February 05, 2018, 10:41:39 AM »
Thanks for all the replies! I finally got it out by removing one corner at a time. The screw was tight and so I loosened it. It was still sticky and hard to slide so I put a bit of silicone on it and it moves much better now but still sticky. My guess is that once a coin is put in, it is never bothered with again. It may have been bad since day one. Thanks again all!!!!

Does it look like a beverage was maybe spilled into it long ago? People in casinos sometimes slosh whatever they are drinking and the liquid lands on the front of the machine, seeps down.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline jay

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2124
  • Reputation Power: 164
  • jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!
  • Gender: Male
  • The only way to beat the casino is to own it.
Re: Comparitor Slide Stuck
« Reply #10 on: February 05, 2018, 10:55:45 AM »
I would just buy a new one..... typically a CC16 is under $25 on ebay.
If you can't afford to lose you can't afford to win.

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! :)

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Comparitor Slide Stuck
« Reply #11 on: February 05, 2018, 11:13:38 AM »
I would just buy a new one..... typically a CC16 is under $25 on ebay.


Not any more.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal