New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Renovation successful, IT PLAYS and PAYS!!  (Read 9785 times)

0 Members and 1 Guest are viewing this topic.

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Renovation successful, IT PLAYS and PAYS!!
« on: January 24, 2016, 09:29:56 PM »
this will probably end up being a very long post, I will update it as more time and information warrant.  I have been working on my first game, 1992 IGT Player Edge Plus Montana Choice video poker.  Used on location in a Montana casino until around 2002, based on the state sticker on the side. Purchased for $100 as a afterthought while obtaining a pinball game.  Being Montana jurisdiction, it had no hopper or coin payout provisions, all coins went directly to the drop bucket.  The original door plate had no chute to send coins to a hopper, just a rectangular slot at the bottom for the printer paper to feed out.  There is no diverter coil in the coin comparitor, a fixed metal link held the diverter plate back so all coins went down the front plastic guides and into the base stand. There was originally a large printer that used two roll of paper for customer receipt and internal rolled up audit. There is no "bet max credits" button on the front door, it is blanked off.  There appears to be no provision for this button in the wiring harness. I found several wiring differences between what is shown in the IGT PE+ diagrams online and the actual wiring inside my game.  Basically I had to rewire several thing to be like the official diagrams.  I had the game software chips changed from Montana CG1209/CAP1144/MG0183 to PP0158/CAP904, it now plays "4 of a kind bonus poker" only.  Still looking to get the multigame software XM00002P. I removed several items that would serve no purpose any longer, including the four coin meters, the progressive interface wiring, and printer wiring.
Here are some of the current modification to allow game play with current software:

1. The old printer slides in just like the hopper.  I purchased a good used quarter hopper and had to modify the slide in connector.  I was able to disconnect the four existing pins from printer connector J10 at the motherboard and reconnect them for hopper functions.  When viewed from the front of the hopper connector, the upper left is "hopper full" inserted in J13 position 8; the upper right is "coin out" inserted in J13 position 9; the middle left continues to be the ground; the middle right becomes power to the coin out detector in J13 position 10.  The lower left and right connections are 115 vac power to operate the old printer.  I still have to purchase the solid state relay to start and stop the hopper motor when signals come from J13 positions 5 and 6. 

2. The door open detect stymied me for several days.  When doing input self tests, I could always get the input to change from 1 to 0 and back by opening and closing the bill validator add on box door.  After reading all the posts in the IGT section, I found reference to self test input flickering rapidly between 1 and 0 as being normal.  After doing tests and voltage reading on the optics themselves, I found them working correctly. I traced all the wires and found the door emitter powered as shown in the diagrams, but not the cabinet receiver. My optic receiver wires went across the top the monitor, down the left side with the meter wiring bundle and into the MPU housing on the top connector then directly to motherboard connector J1, pins 14B and 15A.  These are labeled as switch 23 on the diagrams, purpose unknown.  I cut these 2 wires, rerouted and spliced them into J13 wires 19 and 20.  When I check the self test inputs screen now, closing the door caused the door input indication to rapidly alternate between 1 and 0. This rewiring allowed my game to reset and play normally.  Looking at the diagram leads me to surmise that the 7 volts ac is being 1/2 wave rectified by the diode CR25 causing the door emitter to "flash" about 30 times per second or so. This is picked up by the cabinet optic receiver, allowing a pulsating current flow thru J13 pin 19.  The MPU board decodes this pulsation as NORMAL and allows game operation.  If the signal is always shorted on or opened off, the board decodes as DOOR OPEN.  This provides better circuit monitoring and any type of wiring fault will cause the DOOR OPEN tilt.  I just adjusted my drop door setting to NO and will keep the key locks secure. I really felt good when the first game played.

Thanks to all the prior posters, I needed the information you provided.  I hope my post will help others also.

I still need to get the hopper relay installed and operational. I will add more later....trying to add pictures, internet being stubborn

1-30-2016 UPDATE = Hopper control relay installed and wired to J13 pin 5 and 6, ground, and 115 vac.  It works!! Hopper passes self test by paying out 10 coins.  Game play is much more enjoyable not having to open the door and rob the coin bucket so often. Now I need to keep a pile of quarters around until I get the external DBV programmed and functional. Still investigating the PLAY MAX CREDITS button installation.
« Last Edit: January 30, 2016, 02:48:24 PM by pinballlarry1 »

Offline jay

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2122
  • Reputation Power: 164
  • jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!
  • Gender: Male
  • The only way to beat the casino is to own it.
Re: Renovation successful, IT PLAYS!!
« Reply #1 on: January 24, 2016, 09:38:51 PM »
Hi - the printer configuration for the PE+ is a very rare thing.

Can you send any pictures of the printer and any details - model etc, how it was connected, how it behaved on cash out etc.
How it was mounted (ie through the door - side mount glass etc).
If you can't afford to lose you can't afford to win.

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! :)

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Renovation successful, IT PLAYS!!
« Reply #2 on: January 24, 2016, 10:21:55 PM »

What a good looking machine, good job on the work to it!   :cool_thumb_up:
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Printers from my PE+
« Reply #3 on: January 26, 2016, 09:28:20 PM »
Here are photos of the TDC printer, having trouble with this post, will update again.

the original printer is as big as a coin hopper and slides in the same way.  It uses the same 6 blade wire connector as the hopper, 115 vac on the bottom two wires, data communications on the top two pins.  Easy to rewire for coin hopper installation.  The printer uses 2 large rolls of paper, both being fed together thru the middle past the ink ribbon and dot matrix print head.  The audit paper is rolled up on top spool, while the customer receipt goes out past the cutter bar, and thru the door into the coin tray.  The cutter bar is energized by a large solenoid assembly. I never saw the printer in action, but it has a good sized circuit board mounted on the back plate which is probably monitoring several functions such as paper empty, jam, etc.  Not sure if the MPU or printer kept track of the lifetime coin records.  Anyway, if anyone wants these 2 printers, I would be willing to send them to you for just the price of USPS shipping.  They are heavy and probably too large for the flat rate box.
« Last Edit: January 30, 2016, 02:45:24 PM by pinballlarry1 »

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS and takes bills!!
« Reply #4 on: February 06, 2016, 06:38:09 PM »
2-6-2016 update:

1. Received the SET 038 chip today and reprogrammed the MPU to enable the bill validator.  It was successful and the ancient JCM DBV-45-SU groaned to life and now accepts older style $1 and $5 bills. Yeah!
2. Received a set of new buttons with LED bulbs and installed them today.  This took a lot longer that I expected, about 3 hours non stop.  Lots of parts to remove for access and lots of tiny wires.  I also cleaned the dirt and smoke residue from all the exposed surfaces.  Turned a white rag nasty brown.  My new buttons look great, nice and bright without the old scratches and burn marks.  I kept the original legend plates including the 5 “REMOVE/RECALL” (hold) which are a pale yellow color.  The wiring diagram I have may be incorrect in the numbering of the hold buttons, it shows 1,3,4,5,2 from top to bottom.  My machine wiring color codes  match up if the numbering is 1,2,3,4,5 from top to bottom.  Since my game works correctly who knows.

The last project for this machine is getting the correct multi game program chip.

Offline shortrackskater

  • Mark
  • NLG Site Administrator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3945
  • Reputation Power: 263
  • shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #5 on: February 06, 2016, 09:28:03 PM »
 :applause:
You spent a lot of time and effort and it looks great so far.
Does it just play a single game now?
Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #6 on: February 07, 2016, 09:17:17 AM »
yes, it plays 4 of a kind bonus poker, with mpu chips PP0158 / CAP904 / CG2003 on a standard (non-super) PE+ board.
It's getting a lot of use from the wife and visitors, I checked the statistics page, over 8,000 hands dealt, no royal flush yet....
« Last Edit: February 14, 2016, 04:58:42 PM by pinballlarry1 »

Offline Shaggy

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1798
  • Reputation Power: 143
  • Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!Shaggy Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #7 on: February 07, 2016, 09:24:33 AM »
Congrats, nice looking machine. I had mine (different kind) 2½ years before I hit a Royal. They are way too fun.

Dave
"All things being equal. The easiest explanation and the easiest answer is probably the right one".

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #8 on: February 07, 2016, 09:45:45 AM »
.....
The last project for this machine is getting the correct multi game program chip.
.....

Will the multi-game chipsets work on a standard non-super mpu board?

I think a royal flush should happen about every 40,000 hands or so. But a lot of times people won't go for the royal when they have a "safe" hand, like this on Jacks of Better:

A,K,Q of clubs, with A diamonds and another card. People tend to keep the high pair (both aces) and discard the other 3 cards, instead of keeping the A,K,Q of clubs and playing for the royal. Not going for the royal on those opportunities will lengthen the time it takes to get one.



If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline jay

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2122
  • Reputation Power: 164
  • jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!
  • Gender: Male
  • The only way to beat the casino is to own it.
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #9 on: February 07, 2016, 11:15:57 AM »
The super board is required for the multi game chipsets.
You should be able to pick up one relatively cheap.
The super board  will work in your machine without any additional mods.
If you can't afford to lose you can't afford to win.

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! :)

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Jackpot, too bad it's all house money....
« Reply #10 on: February 13, 2016, 06:09:13 PM »
biggest win to date, over 15,000 hands played.  4 aces.

Offline jay

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2122
  • Reputation Power: 164
  • jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!
  • Gender: Male
  • The only way to beat the casino is to own it.
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #11 on: February 15, 2016, 05:55:53 PM »
As far as I know there are two boards.
Super and non-super.

There is also a rare wing board - that works with the super board to allow 5 chips - that share the same capx and M?O sets to work as a multi-poker.

If you can't afford to lose you can't afford to win.

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! :)

Offline BrianT

  • Sr NLG Member
  • NLG Member 101 to 250 Posts
  • *
  • Posts: 116
  • Reputation Power: 9
  • BrianT New User has no influence.
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #12 on: February 15, 2016, 06:52:49 PM »
Based on my research from a few PSRs (and some actual chip sets) here is what I know about the wingboard sets:

XMP00007
XMP00011
XMP00017

All use CAPX2298 + CG2298 sets and at least XMP00017 can also use CG2426 which adds support Black Jack Bonus, Super Double Bonus and Triple Double Bonus.

XMP00014 uses CAPX2352 + CG2352 is an International set supporting International currency symbols

XMP00013
XMP00022
XMP00026

All use CAPX2346 + CG2346 and are Spanish sets

XMP00030 uses CAPX2298 + CG2451 and supports the additional games that CG2426 does but also adds support for Double Double Bonus Plus and maybe others.

Currently I'm not aware of a French version XMP000xx program rom or CG2xxx graphics sets but I suspect there is at least one version out there.

My documentation has missing info for XMP00015, XMP00016, XMP00019, XMP00021, XMP00023, XMP00027 through XMP00029 and anything higher then XMP00030 so there might be French version or other International versions ect....

Personally I have actually verified the above information for XMP00017, the 3 listed Spanish programs and XMP00030.

If anyone has any other information or XMP00014+CAPX2352+CG2352 please contact me via PM here, thanks!


BrianT


PS: The following programs are designed to use the predetermined 5 games sets that only need the Superboard and not a Wingboard: XMP00002, XMP00003, XMP00004, XMP00006, XMP00007, XMP00010 (International), XMP00012 (International), XMP00018 (International), XMP00020, XMP00024 and finally XMP00025 (International).  Each of these games sets require specific DATA roms and CGxxxx sets as list below:

Known (verified) compatible XMP Poker Programs:
   XMP00002
   XMP00003
   XMP00004
   XMP00006
   XMP00020
   XMP00024
   XMP00025 (International denominations & Auto Hold always on)

Known Multi-Poker DATA roms + CG graphics sets are:

XM00001P + CG2174
XM00002P + CG2174
XM00003P + CG2174
XM00004P + CG2196
XM00005P + CG2240
XM00006P + CG2174
XM00007P + CG2233
XM00008P + CG2228
XM00009P + Unknown
XM00013P + CG2296

all sets use CAPX2174  (type Philips N82S147N)

Sets XM00010P, XM00011P, XM00012P, XM00014P & XM00015P are completely unknown at this time. If you have these or any info on them PLEASE contact me via PM here.  Also if you know the correct CGxxxx graphics set for XM0009P please contact me or post here, THANKS!


Information by specific DATA rom:


Superboard : Multi-Poker (XM00001P) - Bonus Poker, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Bonus Poker

DATA ROM: XM00001P
CG Combo: CG2174+CAPX2174

Combined average payout percent: 99.64%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P77A      99.20%
Bonus Poker Deluxe   P200A     98.50%
Deuces Wild Poker    P34A     100.80%
Jacks or Better      CA        99.50%
Double Bonus Poker   P324A    100.20%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00002P) - Bonus Poker, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Bonus Poker

DATA ROM: XM00002P
CG Combo: CG2174+CAPX2174

Combined average payout percent: 98.14%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P90A      98.00%
Bonus Poker Deluxe   P251A     97.40%
Deuces Wild Poker    P62A      98.90%
Jacks or Better      BA        97.30%
Double Bonus Poker   P323A     99.10%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00003P) - Bonus Poker, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Bonus Poker

DATA ROM: XM00003P
CG Combo: CG2174+CAPX2174

Combined average payout percent: 96.78%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P101A     96.90%
Bonus Poker Deluxe   P253A     96.30%
Deuces Wild Poker    P47A      96.80%
Jacks or Better      P11A      96.10%
Double Bonus Poker   P325A     97.80%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00004P) - Dbl Dbl Bonus Poker, Nevada Bonus Poker, Joker Poker, Dbl Bonus Poker & Dbl Deuces Poker

DATA ROM: XM00004P
CG Combo: CG2196+CAPX2174
Game Program: Almost always found with XMP00002 but also works with the others listed above

Combined average payout percent: 99.22%

Game Type           PayTable   Payout
-------------------------------------
Double Double Bonus  P505A     97.80%
Nevada Bonus Poker   P503A     98.80%
Joker Poker          ZA       100.20%
Double Bonus Poker   P324A    100.20%
Double Deuce Poker   P236A     99.60%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00005P) - Bonus Poker, Dbl Dbl Bonus Poker, Joker Poker, Dbl Joker Poker & Dbl Bonus Poker

DATA ROM: XM00005P
CG Combo: CG2240+CAPX2174
Game Program: Almost always found with XMP00004 or XMP00024 but also works with the others listed above (always labeled for the NJ jurisdiction)

Combined average payout percent: 97.06%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P101A     96.90%
Double Double Bonus  P506A     96.70%
Joker Poker          NA        97.20%
Double Joker Poker   ? ? ?     98.10%
Double Bonus Poker   P434A     96.40%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00006P) - Bonus Poker, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Bonus Poker

DATA ROM: XM00006P
CG Combo: CG2174+CAPX2174

Combined average payout percent: 99.04%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P77A      99.20%
Bonus Poker Deluxe   P200A     98.50%
Deuces Wild Poker    P62A      98.90%
Jacks or Better      CA        99.50%
Double Bonus Poker   P323A     99.10%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00007P) - Bonus Poker, Dbl Dbl Bonus Poker, Deuces Wild Poker, Dbl Bonus Poker & Jacks or Better

DATA ROM: XM00007P
CG Combo: CG2233+CAPX2174

Combined average payout percent: 97.38%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P90A      98.00%
Double Double Bonus  P506A     96.70%
Deuces Wild Poker    P59A      97.10%
Jacks or Better      BA        97.30%
Double Bonus Poker   P325A     97.80%

*************************************************************************************************************************


Superboard : Multi-Poker (XM00008P) - Bonus Poker, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Bonus Poker

DATA ROM: XM00008P
CG Combo: CG2228+CAPX2174

Combined average payout percent: 99.30%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P77A      99.20%
Bonus Poker Deluxe   P200A     98.50%
Deuces Wild Poker    P34A     100.80%
Double Bonus Poker   P324A    100.20%
Double Double Bonus  P505A     97.80%

*************************************************************************************************************************

Superboard : Multi-Poker (XM00009P) - Aces & Faces, Bonus Poker Dlx, Deuces Wild Poker, Jacks or Better & Dbl Aces & Faces Poker

DATA ROM: XM00009P
CG Combo: CG set is unknown/undumped + CAPX2174

Combined average payout percent: 98.47%

Game Type           PayTable   Payout
-------------------------------------
Aces & Faces         ? ? ?     99.30%
Bonus Poker Deluxe   P200A     98.50%
Deuces Wild Poker    P62A      98.90%
Jacks or Better      BB        97.80%
Double Aces & Faces  ? ? ?     99.20%

*************************************************************************************************************************

Superboard : Multi-Poker (XM00013P) - Bonus Poker, Dbl Dbl Bonus Poker, Deuces Wild Poker, Jacks or Better & Joker Poker

DATA ROM: XM00013P
CG Combo: CG2296+CAPX2174

Combined average payout percent: 95.80%

Game Type           PayTable   Payout
-------------------------------------
Bonus Poker          P596A     95.80%
Double Double Bonus  P507A     95.60%
Deuces Wild Poker    P57A      96.00%
Jacks or Better      P11A      96.10%
Joker Poker          P17A      95.50%

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #13 on: February 15, 2016, 09:08:56 PM »
biggest win to date, over 15,000 hands played.  4 aces.

pinballlarry1,
you may have so much fun with this game you don't need to get a super board with multigame software.

And why do you have a "1" at the end of your username, how many pinballlarry's can there be?   :dancing_2:
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #14 on: February 16, 2016, 06:30:14 PM »
I was originally pinballlarry back in the days of Commodore 64, AOL, and Netscape. After the @home network changed to Cox, it mangled up my old name and refused to let it migrate forward.  So I just made a new name with the number 1 included.  Been good ever since.  I am buying a super board, but have to wait for the wife to play off over 1500 credits..... The machine has been very generous with 4 of a kind wins, including three times hitting 4 Aces. All good in Montana right now.
 

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #15 on: February 16, 2016, 06:37:07 PM »
I was originally pinballlarry back in the days of Commodore 64, AOL, and Netscape. After the @home network changed to Cox, it mangled up my old name and refused to let it migrate forward.  So I just made a new name with the number 1 included.  Been good ever since.  I am buying a super board, but have to wait for the wife to play off over 1500 credits..... The machine has been very generous with 4 of a kind wins, including three times hitting 4 Aces. All good in Montana right now.
 

These machines are a lot of fun, and it is always good when the wife enjoys them too. I was teasing you a little about the username, none of my beeswax what anyone selects for a screen name, but thanks for the explanation, sounds like you've been around the internet a lap or two.   :propeller:
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline shortrackskater

  • Mark
  • NLG Site Administrator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3945
  • Reputation Power: 263
  • shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #16 on: February 16, 2016, 06:46:47 PM »
I was originally pinballlarry back in the days of Commodore 64, AOL, and Netscape. After the @home network changed to Cox, it mangled up my old name and refused to let it migrate forward.  So I just made a new name with the number 1 included.  Been good ever since.  I am buying a super board, but have to wait for the wife to play off over 1500 credits..... The machine has been very generous with 4 of a kind wins, including three times hitting 4 Aces. All good in Montana right now.

Is your wife getting the "win money" ???  :applause:
I've enjoyed your post and also apologize for the hijacking!
Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
and now...SUPERBOARD!! and hopper adjustment
« Reply #17 on: February 17, 2016, 07:44:08 PM »
Another update:
When paying out coins, many never bridged the gap to the door slot and coin tray.  About 1/2 would end up in the bottom of the cabinet. After looking things over, I noticed that the hopper wire connector also acts as the positioning stop and has another set of holes in the base flange.  After moving the connector to the other mounting holes, the hopper is positioned about 1/4" further forward and all the coins being paid out now travel successfully to the tray. Another difference of the original printer.
Installed the superboard tonight. Awesome having 5 choices that match the game glass.  Also like the extra menu choices such as autobet which allows you to repeat the coin bet with just one button push.  The old game board required multiple pushes of the credit button, finger got pretty tired betting 5 coins for an hour.  Superboard home screen looks good, see photo.
Superboard is using Game chip XMP00002 / Data chip XM00003P / Cap X2174 / graphics CG2174
Not much else to do now but enjoy.......
« Last Edit: February 17, 2016, 08:05:51 PM by pinballlarry1 »

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: Renovation successful, IT PLAYS and PAYS!!
« Reply #18 on: February 17, 2016, 08:16:40 PM »
That's great you got the superboard installed, did it also come with the multigame chips or did you have to order them separately?

Nice job on figuring out the hopper positioning, I'm gonna start referring some of the folks with PE+ questions to you!    :odie:
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline pinballlarry1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 12
  • Reputation Power: 1
  • pinballlarry1 New User has no influence.
  • Gender: Male
  • NLG
Re: superboard
« Reply #19 on: February 18, 2016, 05:29:18 AM »
I bought the superboard  on eBay, it was complete with the game chips.  I just had to transfer it to the aluminum carrier. Very easy install.

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal