New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

  Welcome to your New NLG Forums
This is a free information sharing site for those of us
in the amusement and gaming industry.

Your NLG Staff. 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: 7.3 controller  (Read 663 times)

0 Members and 1 Guest are viewing this topic.

Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
7.3 controller
« on: June 18, 2017, 12:04:15 PM »
How do i get into 7.3?  I can only get to 7.2?
Once you get into the 7 key chip config you want to scroll to 7.3 ProgressiveStep one:  go into 7.3.1Controller Select7.3.1.1Game 17.3.1.      your machine denomination (I will use 25 cents)Game 1: Denom 25: Level 1        Stand Alone: Disabled Level 1       None:            Disabled       SAS:              Disabled       Link:              Level 1 Disabled Step 2:  Next go into 7.3.3     Stand Alone Set up7.3.3.1 Level 1 and set up
« Last Edit: June 27, 2017, 08:06:53 AM by BG1911 »

Offline qbert

  • Topic Moderator
  • NLG Member 501 TO 10000 Posts
  • *
  • Posts: 1397
  • Reputation Power: 99
  • qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #1 on: June 18, 2017, 12:40:39 PM »
What SB and SG chips are on the MPU board located on the lower left side?
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #2 on: June 18, 2017, 05:34:45 PM »
SB 100312
SG 000207

Offline RB

  • Sr NLG Member
  • NLG Member 501 TO 10000 Posts
  • *
  • Posts: 901
  • Reputation Power: 58
  • RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #3 on: June 19, 2017, 05:08:25 AM »
The PSR for SG000207 shows no options available for progressive setup. You might want to update those SG chips. SG000363 recommended for a 500 series MPU. SG000523 or 598 for 1270 (enhanced) MPU. You will need a key chip to make changes & as always a clear chip is recommended. IVC000224 & KEY00045 will do virtually any S2000 except those equipped & R boards.

Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #4 on: June 19, 2017, 11:06:22 AM »
Thanks,


I asssumed I could set it up because the top glass said progressive.  I have two other machines that may work. if I give you the chip numbers, can you tell me if they can be set up for progressive?


Thanks,

Dave

Offline RB

  • Sr NLG Member
  • NLG Member 501 TO 10000 Posts
  • *
  • Posts: 901
  • Reputation Power: 58
  • RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.RB Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #5 on: June 19, 2017, 12:45:14 PM »
Yes the SG chips are what matters & probably the version as well. I would think progressives should have a single denom version chip or at least be set up as single denom even if a multi denom version chip is used.

Offline qbert

  • Topic Moderator
  • NLG Member 501 TO 10000 Posts
  • *
  • Posts: 1397
  • Reputation Power: 99
  • qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!qbert Has great potential!
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #6 on: June 19, 2017, 01:49:52 PM »
Actually a Spectrum does multi denomination really well. You can set up each denomination with it's own jackpot amount and each one's roll up rate. Really cool.
I would suggest getting the SG363s for this unit assuming you have a 500 series MPU. Post a picture of the MPU board and we can tell you for sure.
SG363s are the go to chips for the home user anyway. You already have the key chip.
Rich
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #7 on: June 26, 2017, 11:57:53 AM »
I have not had any time to work on this, but found a few minutes to look at two of my other machines. Here are the chip numbers.  Would the progressive set up work on either of these?  I was hoping I could do it without clearing out the machine and use it on an exsiting machine.


One of the machines uses:


SB100009
SG000598


THe other uses:


SB101122
SG000399




Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #8 on: June 26, 2017, 03:27:45 PM »
Ended up key chipping one of my other machines and it is a progressive. Or at leastI was able to get to 7.3 and try to set up machine.


7.3.1.1 Game 1
7.3.1.2 Machine Denomination ($.25)


Game 1: Denom .25:Level 1

Stand Alone: Level 1
None: Disabled ($0.00)
SAS: Disabled ($0.00)Link: Disabled ($0.00)
« Last Edit: June 27, 2017, 08:08:34 AM by Ron (r273) »

Offline BG1911

  • New NLG Member 1 to 100 Post
  • **
  • Posts: 68
  • Reputation Power: 6
  • BG1911 New User has no influence.
  • Gender: Male
  • NLG
Re: 7.3 controller
« Reply #9 on: June 27, 2017, 07:59:16 AM »
I found this on another post....


7.3 Progressive
The progressive submenus can only be configured and/or displayed when the paytable program supports progressive awards.

This note indicates to me that perhaps your SB version doesn't support progressive configuration...post your SB and i can check the PAR sheet if you don't have it.

7.3.1 Controller Select - Displays a list of levels to be configured. For each level, the operator must select from a list of progressive types (e.g., none, SAS, link, and standalone). NOTE: Before the operator can select SAS as the controller, the SAS group must be set.

7.3.2 Progressive Display - Setup Although this option appears, it has no affect.

7.3.3 Stand Alone Setup - This page determines the limit amount, the current amount, the add percentage, and the base amount for each progressive level.

7.3.4 SAS Progressive Group - This page sets the SAS progressive group. If set to zero, SAS progressive capabilities are disabled. The operator can set the SAS group from 1 to 255.


My machine is (7.3.4) is set to =000. Is this why it is not working?  If I change it to a number from 1 to 225, what does this do?


Thanks,


Dave


Corrected small print
« Last Edit: June 27, 2017, 08:14:16 AM by Ron (r273) »

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1159 Highway 95 Bullhead City AZ 86429
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription.


To help cover the cost of Pizza, Coffee, Aspirin, Hosting and Bandwidth.  
Contributing Members Get: Unlimited personal messages: Can save topics and replies as drafts:
Can Post to the Classified ads: Unlimited Access to the Downloads: and This Minty Badge.



**Subscription Link** **Subscription Link**



           
If you would rather remain anonymous  Thank You  or just want to help Support the site, please use the "make a donation" button.




From your entire NLG staff, Thank you for supporting NLG.





Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2017


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




NewLifeGames.com Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1600 x 900 pixels.