New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: IGT GAME KING  (Read 2492 times)

0 Members and 1 Guest are viewing this topic.

Offline RATTLER

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 39
  • Reputation Power: 3
  • RATTLER New User has no influence.
  • Gender: Male
  • NLG
IGT GAME KING
« on: July 23, 2017, 05:30:29 AM »
What is needs to be done to change from a game king 6.2 044 board to a different game if i buy the game that comes with the mpu & flash board. Is it just pulling the game king board out & putting the new board in

Offline rockymountainslots

  • Resigned NLG Member
  • New NLG Member 3 to 100 Posts
  • *
  • Posts: 79
  • Reputation Power: 16
  • rockymountainslots New User has no influence.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #1 on: July 23, 2017, 06:33:41 AM »
you need a key chip28 to clear game and set back up

Offline hemiroid

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 492
  • Reputation Power: 32
  • hemiroid Is working their way up.hemiroid Is working their way up.hemiroid Is working their way up.
  • Gender: Male
  • Old hot rod lover from the land of 10,000 lakes
    • Greg's Speed Shop
Re: IGT GAME KING
« Reply #2 on: July 23, 2017, 06:50:13 AM »
What is needs to be done to change from a game king 6.2 044 board to a different game if i buy the game that comes with the mpu & flash board. Is it just pulling the game king board out & putting the new board in




I am learning too Rattler.  Here is some good watching:

https://www.youtube.com/watch?v=7emDY0iojaQ

https://www.youtube.com/watch?v=aR_B1e5_lp0
I like casinos and I love slot machines
I lost a fortune, if you know what I mean
Those one armed bandits was the wrong thing to choose
A man with nothing ain't got nothing to lose

Offline oldgeiser1

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 157
  • Reputation Power: 17
  • oldgeiser1 New User has no influence.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #3 on: July 23, 2017, 09:35:00 AM »

Offline bpracer

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 709
  • Reputation Power: 50
  • bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #4 on: July 23, 2017, 01:05:48 PM »
What is needs to be done to change from a game king 6.2 044 board to a different game if i buy the game that comes with the mpu & flash board. Is it just pulling the game king board out & putting the new board in

There is an eeprom (24LC256) on the back plane that contains set up information.  If you are going to have an MPU with the game board set up for easy change outs you also need to keep an eeprom mated with your boards.  It's simple to change the chip if you have the socketed back plane.

Offline hemiroid

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 492
  • Reputation Power: 32
  • hemiroid Is working their way up.hemiroid Is working their way up.hemiroid Is working their way up.
  • Gender: Male
  • Old hot rod lover from the land of 10,000 lakes
    • Greg's Speed Shop
Re: IGT GAME KING
« Reply #5 on: July 23, 2017, 04:44:14 PM »
There is an eeprom (24LC256) on the back plane that contains set up information.  If you are going to have an MPU with the game board set up for easy change outs you also need to keep an eeprom mated with your boards.  It's simple to change the chip if you have the socketed back plane.


Bryan, is this what a guy needs to do as your talking?

https://www.digikey.com/product-detail/en/amphenol-fci/DILB8P-223TLF/609-4717-ND/4292069
https://www.digikey.com/product-detail/en/fremont-micro-devices-usa/FT24C256A-UDR-B/1219-1052-ND/3516004
I like casinos and I love slot machines
I lost a fortune, if you know what I mean
Those one armed bandits was the wrong thing to choose
A man with nothing ain't got nothing to lose

Offline bpracer

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 709
  • Reputation Power: 50
  • bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #6 on: July 23, 2017, 07:19:06 PM »
There is an eeprom (24LC256) on the back plane that contains set up information.  If you are going to have an MPU with the game board set up for easy change outs you also need to keep an eeprom mated with your boards.  It's simple to change the chip if you have the socketed back plane.



Bryan, is this what a guy needs to do as your talking?

https://www.digikey.com/product-detail/en/amphenol-fci/DILB8P-223TLF/609-4717-ND/4292069
https://www.digikey.com/product-detail/en/fremont-micro-devices-usa/FT24C256A-UDR-B/1219-1052-ND/3516004


Yes, they should work.  Most of the Back Planes (but not all), have the socketed chip.

Here is what I  used:

http://www.mouser.com/ProductDetail/Microchip-Technology/24LC256-I-P/?qs=sGAEpiMZZMuVhdAcoizlRS6kJF9v8jHR1dyivW9lRao%3d


Offline RATTLER

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 39
  • Reputation Power: 3
  • RATTLER New User has no influence.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #7 on: July 24, 2017, 06:21:11 AM »
Is the backpane board the same as the motherboard and if so is it the U14 socket & if that is it I have 1 board that looks like it is socket & the other is soldered in which i would like to change. I seen the link to buy the eprom to plug in would you know the link for the female holder for the mouser website to change my other board. Also then are these the steps to be able to change games. Pull old game MPU & Flash board out & eprom chip out. Put new eprom chip in & New game MPU & Flash board in with clear chip 28 in & clear it & then put the game boot chip in & program the eprom for that game. And after that to change the game to the old one just use the other eprom chip & the old game MPU & Flash board. I hope I didn't confess you. Thanks Ralph                                                                                                                         

Offline bpracer

  • NLG Member 501 to 10,000 Posts
  • *****
  • Posts: 709
  • Reputation Power: 50
  • bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.bpracer Is on the verge of being accepted.
  • Gender: Male
  • NLG
Re: IGT GAME KING
« Reply #8 on: July 24, 2017, 01:41:40 PM »
Is the backpane board the same as the motherboard and if so is it the U14 socket & if that is it I have 1 board that looks like it is socket & the other is soldered in which i would like to change. I seen the link to buy the eprom to plug in would you know the link for the female holder for the mouser website to change my other board. Also then are these the steps to be able to change games. Pull old game MPU & Flash board out & eprom chip out. Put new eprom chip in & New game MPU & Flash board in with clear chip 28 in & clear it & then put the game boot chip in & program the eprom for that game. And after that to change the game to the old one just use the other eprom chip & the old game MPU & Flash board. I hope I didn't confess you. Thanks Ralph                                                                                                                       


The back plane is the board that the MPU plugs/slides into.

http://www.mouser.com/ProductDetail/TE-Connectivity/1-2199298-2/?qs=%2fha2pyFadugJp%2f0oQpeWgcdKbmhfM%252bG5f2aD9jt0RGQdskDEwvmLNQ%3d%3d

http://www.mouser.com/ProductDetail/3M/4808-3004-CP/?qs=%2fha2pyFadujYLigJjDxSK4ZKte8kebB6z16t3G2ncX%2fWG7ERM9POnQ%3d%3d

You are correct, you would need to do a clear and set up the game the first time with the new eeprom and then keep the eeprom matched for each MPU and change the eeprom each time you insert a MPU.

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal