New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1] 2   Go Down

Author Topic: Bally S6000 Blazing Sevens Blinking RED led  (Read 7408 times)

0 Members and 1 Guest are viewing this topic.

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Bally S6000 Blazing Sevens Blinking RED led
« on: October 20, 2016, 02:22:25 PM »
New to the SM world
During boot I can see messages on the progressive LEDS then just a C1
 red light flashes once a sec on the mpu
Reels do not calibrate , they just kinda twitch
No insert coin light, no power to Coin Validator
VFD says Welcome to Bally Gaming Amusement Only
No info on message centre no LEDs at all so i cant even enter test mode
Have no done a safe ram clear, have no chips.I do have the Proslot6000 manuals.
Can somebody help me out?
Thanks In Advanced
Rob

« Last Edit: October 20, 2016, 03:58:31 PM by kersch »
Logged

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3562
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #1 on: October 20, 2016, 08:38:21 PM »
How is your battery voltage? Is jumper 20 in place, if not the battery is disconnected.
There are some new full clear chips out there where all you do is turn on DSW1 #8 to clear and leave the chips in.
Makes clearing much easier.
Call Larry and he can walk you through it. 702-363-9998
Logged
Let them that don't want any, have memories of not getting any.

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2583
  • Reputation Power: 165
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #2 on: October 21, 2016, 06:00:07 AM »
Post a pic of outside front door with power on.
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 356
  • Reputation Power: 26
  • pbwizard25 New User barely matters.pbwizard25 New User barely matters.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #3 on: October 21, 2016, 06:21:53 AM »
The problem here is the blinking red light on mpu. Did you just get this machine and was it working when you got it? There are several possibilities  of the cause. Bad mpu, not properly seated mpu, bad,missing or not properly installed chips or the power supply. Trying to doing a safe ram clear is pointless until you get the board to boot up and get some sort of error message in the left display. Scott
Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #4 on: October 21, 2016, 08:25:28 AM »
Received the Slot in this condition, been asked to repair it
Batt 6.3
All chips have been removed from their sockets leads cleaned, sockets cleaned
I will post pic of the front door
In the progressive led window I do see boot up messages , but nothing in the message centre on the door
Thanks
Rob
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 356
  • Reputation Power: 26
  • pbwizard25 New User barely matters.pbwizard25 New User barely matters.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #5 on: October 21, 2016, 08:32:34 AM »
Rob, the progressive is a separate  entity and boots independently. The c1  is saying that it is not communicating  with machine and it can't until it boots up. If you need someone to test your board lmk, I have a few machines to test it in. Scott
Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 356
  • Reputation Power: 26
  • pbwizard25 New User barely matters.pbwizard25 New User barely matters.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #6 on: October 21, 2016, 08:36:30 AM »
I forgot to mention that you need to check the pins where the mpu plugs into the backplane. 1 bent pin on mpu will really mess it up.
Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #7 on: October 21, 2016, 10:05:22 AM »
Pins look good
Here is a pic of the front door
Scott whats your location?

Logged

Offline pbwizard25

  • Contributing NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 356
  • Reputation Power: 26
  • pbwizard25 New User barely matters.pbwizard25 New User barely matters.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #8 on: October 21, 2016, 10:33:50 AM »
Just outside of Erie,Pa.
Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #9 on: October 21, 2016, 12:41:32 PM »
J20 is in place, backplane voltage test points are all good( on the left side bottom)
Not sure how much it will cost to ship this board Scott?
anything else I can do  or look for.
I see mpus available on Ebay for the S6000



Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #10 on: October 21, 2016, 12:52:00 PM »
New discovery , If i remove the mpu and power up , the message centre is alive!!!! But with all EEEE EEEE
I am guessing the MPU is bad ?



Logged

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3562
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #11 on: October 21, 2016, 03:56:58 PM »
If the battery reads 3.6VDC and someone previously changed it before you bought it then the board will NEVER come up until you do a RAM clear procedure with RAM clear chips.

Step one in trouble shooting on a 6000 boards is to clear the RAM.
Logged
Let them that don't want any, have memories of not getting any.

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #12 on: October 21, 2016, 04:18:05 PM »
OK, I can purchase clear ram chips and go from there, This machine was purchased in this condition and sat for months in someones garage
Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #13 on: October 21, 2016, 04:56:48 PM »
Sorry , where do I get Safe Clear ram chips?

Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #14 on: October 21, 2016, 05:27:28 PM »
Safe Clear Ram leave ins have been ordered (jjslots)
Thanks Ill keep you posted

Logged

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3562
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #15 on: October 21, 2016, 06:23:57 PM »
There is a sticky somewhere on this site on how to do a clear on a 6000 board.
Logged
Let them that don't want any, have memories of not getting any.

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #16 on: November 03, 2016, 12:38:06 PM »
Hey Guys, I received the the Leave in Safe Ram clear chips today, I have installed them and did the switch 8 on, press and hold psedo and test on power up , turn off flip sw8 back off , power up , Nothing happened Same red blink every second, no reel dance!
Did I miss something?



Logged

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #17 on: November 03, 2016, 03:39:25 PM »
Still nothing in the message centre
If i remove the mpu and power up I get "8888""8888" on the MC

Logged

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3562
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #18 on: November 03, 2016, 04:32:58 PM »
Did you hold the buttons in until you saw CHC then CLC on the display?
Logged
Let them that don't want any, have memories of not getting any.

Offline kersch

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 14
  • Reputation Power: 0
  • kersch New User has no influence.
  • Gender: Male
  • NLG
Re: Bally S6000 Blazing Sevens Blinking RED led
« Reply #19 on: November 03, 2016, 04:38:21 PM »
I guess that depends, how long do I hold it for?

Logged
Pages: [1] 2   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal