New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Problem: CPU light gon on and off - will not complete startup  (Read 1577 times)

0 Members and 1 Guest are viewing this topic.

Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Shopping out igt s2000 game king (sit down).  When you turn power on the lights on CPU come on for a split second then go off for a few seconds then back on for split second.  It keeps repeating this cycle.


I found that if I remove cabinet i/o it will start to complete setup.  I've unplugged everything in the top cabinet, the printer, the BV, wiring harness to door, I think I have every cable disconnected that comes in or out of the i/o. 


Any ideas??  I've even changed the motherboard.


thanks
« Last Edit: March 28, 2018, 11:04:53 AM by rjpohl »

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #1 on: March 22, 2018, 10:49:32 AM »
Bob,  I think someone had a similar problem, turned out to be the +25 volt line was being pulled down, we started unplugging from the motherboard until the 25volt line stayed at its proper voltage, can't remember what the actual fix was, will contact the person and see if they remember. 

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #2 on: March 22, 2018, 11:41:42 AM »
if I unplug the motherboard connector that goes to the cabinet i/o the lights stay on.  I've unplugged everything that comes out of the i/o but didn't help.  My next step was to remove complete i/o harness and check it. 
thanks


Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #3 on: March 22, 2018, 12:10:27 PM »
Bob,  if I remember ,we traced it to the dummy plug for the coin in unit, it was made wrong.

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #4 on: March 22, 2018, 03:29:52 PM »
It is a sit down and has the plug like a hopper where the coin comparator fits.  There is a plug on it, I will check it in the morning.
thanks

Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #5 on: March 24, 2018, 11:23:39 AM »
I have pulled the whole cabinet i/o harness out of the machine, it is not connected to any thing but the motherboard (connection P8). 

1.  with i/o board disconnected the cpu lights come on and stay on.
2.  with i/o board connected the lights come on for just a split second.

this harness has connection for hopper, and meters and also has a couple connections to power distribution board
i've looked at all connections for wires pulled loose, cut wires, etc

any thoughts?

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #6 on: March 24, 2018, 11:30:30 AM »
Bob,   could you verify if any of the voltages are being drug down?  check the voltages at the motherboard connector, put the meter probes in the hole where the wire is ,  check, the solid red wire, using a black wire with a red stripe as the ground,  13vdc,  check the solid orange wire and any black wire with a orange stripe as the ground, 25vdc. 

see if one of these disappear when you are having the problem.

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #7 on: March 24, 2018, 11:32:49 AM »
Thanks Jim, I will give it a try Monday and let you know.


Offline rjpohl

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1223
  • Reputation Power: 133
  • rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!rjpohl Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #8 on: March 28, 2018, 11:06:39 AM »
Fixed!!!!!
2 connectors (P8 & P10) were reversed on motherboard.
thanks for all the help.

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Problem: CPU light gon on and off - will not complete startup
« Reply #9 on: March 28, 2018, 12:30:51 PM »
Bob,  that would do it,  J-8 a 12 pin connector is a SENET output,  J-10 a 12 pin connector is the bill acceptor  connection,  first three pins are the +13vdc and +25 vdc,  one going to ground and the 13vdc on the 25 vdc line??  lucky something did burn up.

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal