New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Install or remove FutureLogic Gen2 Printer Top Box Bezel Correctly  (Read 2885 times)

0 Members and 1 Guest are viewing this topic.

Offline foster

  • The S2000 Guru
  • Sr NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 409
  • Reputation Power: 29
  • foster New User barely matters.foster New User barely matters.
  • Gender: Male
Removal:
Remove the 2 screws underneath the metal bracket that attach bezel bottom to bracket
Open printer head to access the upper tabs. Failure to release the tabs will snap them off the bezel when you try to pull the bezel free.
Work bezel loose from front of printer
Disconnect front harness from printer
Remove 4 screws holding metal plate to printer

Install:
Secure metal plate with 4 screws
Open printer head
Connect bezel harness to front of printer
Position bezel on printer working the upper tabs into the holes in the metal plate.
Secure bottom of bezel with 2 screws.

I posted this because someone accidentally broke a bezel trying to get it off a Gen2 Printer (it was not me)



Coca-Cola and Slot Machine Addict

If you find this site helpful
Please Consider Making a Donation to help defray the cost of hosting and bandwidth. OR Subscribe to NLG

Offline lazzerjett

  • Contributing NLG Member
  • New NLG Member 3 to 100 Posts
  • *
  • Posts: 66
  • Reputation Power: 10
  • lazzerjett New User has no influence.
  • Gender: Male
  • NLG
Re: Install or remove FutureLogic Gen2 Printer Top Box Bezel Correctly
« Reply #1 on: August 13, 2018, 07:57:38 PM »
Thank you for the information.

I am installing a Gen2 Universal Printer setup for netplex into a 17" round top Igt Lucky Larry Lobstermania that doesn't have one.  I have been looking for a manual or information with pictures that will help me to know where the connections go.  It has a curly cable setup with a three wire and a fourteen wire connectors, and USB end.  I have not seen any place to plug in a USB  plug.  I have contacted the person that sold me the brackets, bezel, and a 10 wire harness.  He told me that he needs to find and send me a 14 wire harness for it, and the bezel with the smaller 3 wire plug.  The one he sent has a connector that is twice as large  and only has 2 wires, while the bezel it has currently has a smaller 3 wire connector for the printer.

I hope someone has a manual that can help me install this correctly.










« Last Edit: August 14, 2018, 01:20:25 PM by rokgpsman »

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal