New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Cashen87 on November 20, 2017, 05:03:55 AM

Title: IGT S + making noise from the handel/coil
Post by: Cashen87 on November 20, 2017, 05:03:55 AM
Hello. I have a issue on my IGT s+ Hot Peppers slot machine. The machine making buzzing noise from the Handel/coil. Any one on this forum know what the problem can be?

Thanks.!!
Title: Re: IGT S + making noise from the handel/coil
Post by: Jim on November 20, 2017, 07:51:42 AM
probably something with the coil, the coil is supplied with 24vAC, not DC,  there is a bridge rectifier mounted on the coil underneath the protective wrap, (you can see the visible hump associated with the bridge)  this goes out all the time.  you can replace the coil and it will probably solve your problem. the coil can be taken off with out removing the handle assembly, just remove the three nuts holding it in place  and with a little effort when you push it back to over come the plunger piece it will come out.  while you have it out, clean the plunger and stretch the spring a little, this will help make a good thumping noise when the coil is used to make the reel stopping noises.

hope this helps

Jim
Title: Re: IGT S + making noise from the handel/coil
Post by: Cashen87 on November 21, 2017, 07:35:06 AM
Thanks, Jim
Title: Re: IGT S + making noise from the handel/coil
Post by: Cashen87 on December 05, 2017, 11:01:26 AM
Which 3 nuts i have to remove to get the Handel coil out of the machine? Pitchers will help me much.

Thanks  :hail:
Title: Re: IGT S + making noise from the handel/coil
Post by: Amechanic on December 05, 2017, 12:36:25 PM
Which 3 nuts i have to remove to get the Handel coil out of the machine? Pitchers will help me much.

Thanks  :hail:

It's spelled Pictures.. Not Pitchers, that's this type for Beer :frosty_beer: or a Baseball Pitcher..
Title: Re: IGT S + making noise from the handel/coil
Post by: Cashen87 on December 05, 2017, 01:01:13 PM
I thinking about the 3 nuts i have to take of on the Handel coil from the machine because i have to replace a new one.
Title: Re: IGT S + making noise from the handel/coil
Post by: Jim on December 05, 2017, 06:42:29 PM
the  three nuts are as pictured.     Jim
SimplePortal 2.3.5 © 2008-2012, SimplePortal