How to Change to a Penny Machine. IGT S+

[AcePeter]

[big]Hello all I forgot how to do  this and  I cant find my notes. I want to change my IGT S Plus to recognize a dollar bill as a 100 dollar bill to give me a 100 credits in my machine. Thanks I lost all my manuals and notes.[/big]

[Crash0]

If your not going to use coin handling, you need a set chip that will allow for penny, usually 88 or 90 will work.
I've done most of mine with an 88.

[Crash0]

On another note, you will need a game chip that will allow you to set hopper to 0 also. 1271 can do that if it's right type for your game.
You will want to make sure Credit Mode is set to Player initiated non-credit
Hand pay display enabled.

[AcePeter]

I just want to change it where it reads an one dollar bill as a 100 dollars. So it will give me 100 credits. I have no hand payouts set. Thanks

[Crash0]

Right, hopper won't handle penny's, that's why I suggested turning it off. you could keep change in it to spit out. the set 88 or 90 will change denom to a penny so when you put a hundred in it'll give you basically 10k credits. Although S+ probably won't go that high, 9999 is max I think.

[AcePeter]

Thanks for the reply. I now just have to remember on how to do it.

[off-track]

Not sure if this helps but the IGT S+ PSR & Test Option sheets say that the 11-6 (denomination) setting requires a SET090 for 1 cent?

[rickhunter]

 

The set90 is necessary for the penny denom and bill validator.  I believe set15 starts at a nickel.

[AcePeter]

I'll give it a try.