New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: repacing reel touch top box power supply (see pics)  (Read 12027 times)

0 Members and 1 Guest are viewing this topic.

Offline qbert

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2697
  • Reputation Power: 184
  • qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!qbert Is an-NLG GOD!
  • Gender: Male
  • NLG
repacing reel touch top box power supply (see pics)
« on: April 22, 2014, 04:06:05 PM »
*This topic was origionally submitted as a WTB for a replacement power supply. After the repair solution listed below was posted the topic was moved and pruned of non-pertinent information. The original poster resolved his issue by the below listed method.*

 
Thanks
Rich
« Last Edit: February 03, 2022, 09:55:31 AM by qbert »
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Offline LINDAM

  • Moderator: Bill Validators and Currency acceptors
  • Sr NLG Member
  • NLG Member 251 to 500 Posts
  • *
  • Posts: 465
  • Reputation Power: 49
  • LINDAM Might someday be someone...LINDAM Might someday be someone...LINDAM Might someday be someone...LINDAM Might someday be someone...
  • Gender: Male
  • When you run out of Quarters...You're done!
Re: repacing reel touch top box power supply (see pics)
« Reply #1 on: April 25, 2014, 05:06:07 PM »
The Power Supply for an IGT S2000 Reel Touch TOP BOX can be replaced with an ATX power supply from your old P/C. The steps are simple and easy.
Items required: Wire Cutters
                         Solder
                         Solder Paste
                         Soldering Iron
                         Shrink tube or Electrical Tape
                         Power Supply (ATX) 175 watt or better

Your origional power supply has 2 plugs on it that go to the top box motherboard. The smaller of the the 2 must be cut off the defective power supply. Cut it so you have lots of wire to work with. matching color for color cut one of the small plugs off your new power supply and solder the plug from the old in it's place. Either use shrink tube or Electrical Tape to cover your soldered joints. TIP: Try to use a power supply that has as long an ATX plug as you can. It will make it a lot easier when you have to swing the top box open to get access to it
« Last Edit: April 26, 2014, 04:22:52 AM by LINDAM »
If it ain't broke.....Stop trying to fix it.

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal