Game Change from R-Board to

[IFFV68]

Game Change from R-Board to ? regular piggy back board with game sound Simms??
As most know, some may know,
I have a I.G.T. 5-Reel 40-line-5 coin max per line, 200 coins max.per game.
 I would like to do a Game change from a R-board to a regular Board # 7682810 with a Sound Smmis attachment.I have SG-363 to use.
 I have a Double 3x4x5x Diamond installed.
My main Board is a 1270. This game has a Piggy back R-Board with a Boot-Chip  RB00003 and below that is a S.B.001000. The label near where it says audio bank is a R000298.
I would like to change to a Double Lucky Strike. 5-reel-9line-10coin max. 90 credits max.
Question is,
If I have to do a Clear chip and a Key Chip, what are the ones I need?
I have a R?00001, Key, & a 45 Key, & a 224 Clear.
Please  give me some advice so I may know what I'm suppose to do with out jumping off my front porch. It's a 4in. drop.
thanks to everyone

[cowboygames]

For the R board you will use the rbk0001 chip if you switch back to using the r board. For the legacy adapter board you will use the 224 and 45 when switching to use it. I would try just swapping the daughter boards first and see if you can get away with just a jackpot reset key to clear the errors that will show up. Only run the clear and key if all else fails

[Ken]

regular piggy back board with game sound Simms?? --- YES
 
363s might work if not then some high 5 hundred series will .. seems like there are a couple of other proms that should be on there along with the base
 
it uses the 224 for a ram clear but doubt you will have to use it .. I think at worst case you might have to use the 45
 
 

[IFFV68]

Ken,
I have some 598 in the mail.
I will give some 597's a try tomorrow.

[Harvs]

Ken,
I have some 598 in the mail.
I will give some 597's a try tomorrow.

I use 598's or 523's in 3Reel games, and 597's in 5Reel games.. (On 1270 Enhanced w/Legacy board)


I once got so fed up with reel tilts due to 363's in a 1270 board, that I called it quits.. I performed a swan dive directly out of my basement window.. Luckily I didn't get hurt, seeing the ground is level with the window. Lesson learned I guess, I put my 363's away.., saved them for my 500 series boards..

[SlotMechanic]

Hey Harvs....is the 597 for only like 2 or 3 different 5 reel games? I thought the 598 was for more of the common 5 reels....

[Harvs]

Hey Harvs....is the 597 for only like 2 or 3 different 5 reel games? I thought the 598 was for more of the common 5 reels....

True. I haven't had many 5R games lately, 597's are what I used in my last few I put together.. Cleo and DDrun I think..


I should drink more coffee before posting, ha (Like Ron says, I'm always 'ALMOST' right..)


Harvs

[RB]

The PSR for SG000597 & 598 are posted in the files section. 597s are for a few specific 5 reel games.
The Double 3x4x5x games would be great if there were some real enhanced sounds available. For that reason I prefer to run it on a 504 board with SG363s & no SIMM.

[foster]

I tried 363, 523, 597, 598 I get thee closest with the 363 but get a SB Fly CRC Error and it came from IGT a SB100909.

With other SG chip sets I get System or Base chip errors.

[IFFV68]

I have my 5-Reel-9-Line Machine up & running.
After clearing out the R-Board & using the proper SB Chip. SB-101576. The proper SG--Chip. SG-100597.
It fired up.
I would like to thank the Following if it's OK. It would of never of happened without their assistance.
Foster, the Guru, Raz, Bob, who is the best,  Ken from Ohio Gaming-he is Top Shelf, Ben Fani a great Vendor in Arizona, Darrell another Great person who has great patience, Ron Ball & Krystel..

This has truly been a New Life Game Team Effort.
Again,
Thank You all.
Topic Solved

[RB]

Glad to hear it & thanks for the acknowledgment !