New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: DVB 200 eats my old bills.  (Read 10086 times)

0 Members and 1 Guest are viewing this topic.

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
DVB 200 eats my old bills.
« on: May 23, 2016, 10:43:04 PM »
Hello all,
I have a IGT RW&B nickel machine.  Had coin issues thanks to this forum I fixed but now I have a new one for ya.  My bill acceptor will accept NEW $1 and $20 bills with no problem.  It does not accept $5 or $10 bills for some reason.  If the $1 bill is not in near new condition it will spit it out a couple times but on the 3rd or 4th time I try to put it in it will jam inside the machine.  Taking the bill out is not difficult but it is annoying.  Any ideas?  I have ordered some of those cleaning pads hoping this will help.

Thx for any and all suggestions.

Eddie





« Last Edit: June 01, 2016, 02:46:47 PM by Ron (r273) »

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #1 on: May 23, 2016, 10:52:53 PM »
The reason it is rejecting the $5 and $10 is probably because the bill recognition software inside the DBV-200 is not programmed for those newer style bills. Remember when our paper money got changed, now they have colors and big numerals and other changes to them? Post a photo of the top or bottom of the DBV-200 head showing the software sticker with rev info and we'll know for sure. The only bill that hasn't been revised is the $1, it should always work. If it doesn't then the DBV has a problem.

The other problem where it doesn't like some older $1 & $20 bills could be that the sensors inside the head need cleaning. No telling how many grubby bills have gone thru it. Sometimes the rubber wheels that pull in the bill get glazed, dirty or hardened and they slip on the bill, which can cause errors. Also, after the bill passes thru the DBV head it goes into the bill transport which also has rubber wheels. If the transport isn't working smoothly, or if the head is not aligned properly to the transport, then the bill can get crumpled as it goes from the head into the transport.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #2 on: May 23, 2016, 11:09:09 PM »
Thx rokgpsman,

it will take 20's, didn't those change along with the 5's and 10's?

Hopefully the cleaning pads will help.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #3 on: May 23, 2016, 11:33:03 PM »
The $20 did change but it was a few years before the $10 and $5 got changed. So your software is probably new enough to work with the $20 but not new enough for the $5 & $10. The US Treasury did the various denomination bill design changes incrementally over several years, then they went back and made more changes. The $20 was one of the earlier ones changed.

The DBV-200 came in two versions, one with software in eprom, the other in flash rom. If yours is the eprom version it is fairly easy to update, provided there is a newer version of software for it. JCM (the mfr) stopped supporting the DBV-200 some time ago, so it probably can't be updated for every new bill. But I think I've seen someone here recently that had DBV-200 heads (or the software for them) and they worked with nearly all new bills, so you might be able to get the software updated. Also, if the cost of a refurbished head is acceptable to you that might be the quickest and easiest way to go, you'd get one that accepted most of the newer bill denominations and would be working more reliably than yours. Can you post a photo of your DBV-200 head showing the software rev sticker, that will help id what you've got and what your options are. Your machine is the IGT S+ you mentioned in another thread, right?

EDIT: here is that thread I was remembering about someone having updated DBV-200 bill validators. The supplier is Blueridgeslots and there isn't anyone more reliable. This was in a Bally discussion thread so you'd want to check with him to see if he has any S+ DBV-200 heads or the updated software for your S+ type of DBV-200. You can contact him here on NLG by using his PM link, look to the left side of any of his postings.

http://newlifegames.com/nlg/index.php?topic=11356.msg61278#msg61278



« Last Edit: May 24, 2016, 12:05:39 AM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline jay

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2122
  • Reputation Power: 164
  • jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!jay Is an-NLG GOD!
  • Gender: Male
  • The only way to beat the casino is to own it.
Re: DVB 200 eats my old bills.
« Reply #4 on: May 24, 2016, 01:08:54 AM »
It wasn't the DBV200 that was dropped it was protocol 23 that was unique to the S+ / PE+
When new monies come out - IGT would pay JCM (Makers of the bill validator) to create signatures for the protocol.
IGT wants to kill the secondary market for slots / video poker so by not paying JCM they are escentially dead-ending the life of these machines and trying to force everyone to buy their AVP (Advanced video platform) or at least the S2000.
The secondary market primarily exists in the Caribbean and some parts of the European east block (former soviet countries). They buy up used machines and run them in hotels where foreigners visit and they use still USD.

You can get a DBV200 flashed for all the new money and it can be used with protocol 24 on the S2000 and the same with the Bally series (sorry don't know what protocols they use). The DBV series however is antiquated and lacks the magnetic sensors that the new money have so you would potentially be open to more instances of fraud if used in a commercial setting. In the Dominican you will see that they have all the denominations larger than 20 turned off. Typically counterfeiters don't bother with counterfeiting lower denominations. If you have a US $100 you take it to the cage and they give it more than the once over before shelling you out a series of $20's

IGT also did not update the S+ and PE+ for TITO (Ticket In / Ticket out).
What is interesting is that the DBVs are fully capable of taking in a ticket and doing remote validation (computer elsewhere in the casino) to put credits on the machine. This is done by SAS (slot accounting system) written by IGT. SAS fully supports EFT (Electronic funds transfer) etc. To this point lots of the casinos would have promotional tickets that you could use on the S+ or PE+ so at least from the Ticket In perspective - this had been done. I think Casino Royalle used to do this but may have updated the machines they use.  The PE+ and S+ also have the capability of using a printer - its on the schematics but I have never seen one in operation. Someone on the forum posted a thread of a video poker machine that was setup with a printer vs hopper and they did a conversion. I believe they got it out of Houston. I would have really liked to have seen the machine with the printer.

I have also found some youtube videos of a protocol convertor. You get a newer head for the S2000 etc, and with it set to Protocol 24 the little board converts to protocol 23. This gets you support probably for the next 6-8 years. There is a web page and a email address. I have sent a couple of emails but never heard back from the seller.

Lastly JCM has the software on their website that is available for download - this will allow you to reflash your machine. However what is publically available doesn't have the support for the new $5. Software which does support the $5 is known to have been created and given to some of the casinos.  I believe some of the vendors here can do a head swap for you - to one with the newer software.


If you can't afford to lose you can't afford to win.

If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! :)

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #5 on: May 24, 2016, 01:30:14 AM »
Thanks Jay. What I meant was that JCM stopped support on his type of DBV-200, they no longer released software updates after a certain date.

The last software release from JCM for his DBV-200 (ID 022/023) was Aug 2006, it was named ver 2.61-04-03. If the software in his DBV-200 is older than this then it can be updated. It still won't take the newest bills that were changed after that date but it may add an additional bill(s) over what his current DBV software will accept.

The new $20 began circulation in 2003. Then the new $50 entered circulation in 2004. The new $10 entered circulation in 2006 and the new $5 in 2008. The $100 was changed again and entered circulation in 2013.

To download software from the JCM website requires a password and it is my understanding they don't give that access to everyday folks. I believe you have to be an authorized casino or casino support person.
« Last Edit: May 24, 2016, 01:07:49 PM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #6 on: May 24, 2016, 06:02:23 AM »
Excellent info as expected! Here is a pic of it.

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #7 on: May 24, 2016, 06:05:13 AM »
.....and to be honest I'm not sure if it's a s+.

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #8 on: May 24, 2016, 06:58:30 AM »
is it the head eating the bills or the transport unit (the part after the head) eating the bills??    that head will accept the money 4 ways, there is also a test you can run and test the head only.


Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #9 on: May 24, 2016, 07:14:56 AM »
Excellent info as expected! Here is a pic of it.

The software rev sticker on your DBV says it is ver 2.60-04-03, which is the next to last software release that JCM released for it. According to the software document for your software release, if I'm reading it correctly, it does have the new $10 recognition, but the following software release added improvements for better $10 recognition and acceptance. So it might improve the $10 operation if you got the software updated, don't know why it isn't taking some $10 now though. Take a look at the revision notes below showing the various software releases, you'll see that on software earlier than yours they added the new $20, then the new $50 and then at your software release they added the new $10.

Something to check, turn your DBV-200 head upside down and you can see if it has an eprom chip in it. If so there may be a sticker on it also showing the software revision number. And if it has an eprom chip that means you can remove the eprom and update the DBV yourself.

But you should probably see about getting the DBV jamming problem and intermittent operation fixed first, no point in updating it if you end up replacing it anyway. Plus if you get it to work well with $20 that may be good enough, why mess around with inserting a $10 when using a $20 will more quickly give you more credits. Since it is a home machine you can retrieve the inserted money easy enough.


.....and to be honest I'm not sure if it's a s+.

Honesty is good!  Just post a photo of your machine showing the front and another one with the main door open showing the lower area where the hopper is. That way we can id it.
« Last Edit: May 24, 2016, 01:11:06 PM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #10 on: May 24, 2016, 08:07:48 AM »
Something I noticed, not a big deal but you probably should be aware of it in case someone asks you about it. The rev sticker on your DBV-200 has the software rev number and next to it is an identifying 4 digit number called the checksum. Your sticker shows "6SBE" but that's a typo, it should say "65BE". Checksums use hexadecimal notation, meaning they use the numbers 0 thru 9 and letters A-F. So there shouldn't be an "S" in a checksum.

If you can't get the jamming problem fixed by aligning the DBV head to the transport, or cleaning it or whatever it takes to fix it then you might want to check on replacing it. If so maybe the replacement DBV-200 will have the latest software already in it.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #11 on: May 24, 2016, 08:24:03 AM »
Wow, you guys are impressive.  The bills get stuck in the transport.  I'll send photos of the machine for ID later today after work......Thx!!!

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #12 on: May 24, 2016, 08:35:44 AM »
Photos will be great, include one of the idplate if possible. It should be on the pull-handle side of the machine.

On the leftside of the DBV transport is a lever with a red handle, you can see it in your photo. I think that handle locks or releases the transport to the DBV head (the front end part that processes the inserted bill). Sometimes there is a problem with getting this lever all the way down locked or something in that area is wrong. The bill should move smoothly thru the head and into the transport which catches the bill and moves it thru the transport to the cash storage compartment.

What Jim is indicating is that you can check this alignment of transport to head, make sure they are mated properly. You can also separate the head from the transport and just exercise the head without the transport, see if the bills go thru ok or not. If so then the transport may be your problem. Jim probably has any parts you may need.
« Last Edit: May 24, 2016, 01:13:39 PM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #13 on: May 24, 2016, 09:42:51 AM »
Here they are.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #14 on: May 24, 2016, 10:52:41 AM »
Looks like an IGT S+ to me but we'll see what the other folks say.

I've attached your photo below showing the mpu board assembly back on the rear wall behind the hopper. The mpu plugs into another circuit board on the floor of the machine, that board is called the motherboard. I also brightened the photos a little so I could see some details.

If you keep this machine and ever want to change the game theme there is a version of it called Red, White and Blue Deluxe. That game has what is called the "nudge" feature, most players say it adds a lot of extra fun to playing. When the reels stop in certain positions they will then jump or move to the payline in anticipation of a win. You may have seen this same nudge feature on other IGT slot machines like the Double Diamond Deluxe. You'd need to change the reel strips and game software on the mpu. [some would say to change the glass also but players like my wife don't even care about that].

Here's an example video of the nudge feature on an S2000 machine:
https://www.youtube.com/watch?v=kOYKFbQWwZI

.
« Last Edit: May 24, 2016, 01:26:10 PM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #15 on: May 24, 2016, 08:07:20 PM »
Good info!!  Thanks so much.  On second thought I do believe it took the new $10 bills just not the $5's.  How is the software updated?  Does it have to be sent to a repair shop or can it be done via internet?  I believe
the bills getting stuck has to do with the transport assy since I replaced it with a spare I had and its doing the exact same thing.  But I'm going to check everything you guys mentioned.  The bills getting stuck is my priority right now, I'll worry about the $5 later.

Much appreciation!

Eddie

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: DVB 200 eats my old bills.
« Reply #16 on: May 24, 2016, 08:48:05 PM »
EDIT - NEW INFO ADDED

The DBV software is stored in either an eprom or a flash memory chip, depends on how it was built. That's why we need to see the bottom of your DBV, to see which type it has, then you'll know your options.

You can always send the DBV head to a shop no matter what type of software chip it has and they will do all the work for you. Here's an example of a place that does the DBV upgrade, look near the bottom of their webpage:
http://www.ohiogaming.com/jcmdbvhead.htm

If your DBV has flash memory the chip is soldered to the circuit board, you can't remove it, takes a special setup to install the software update thru a process called "flashing". For that you'd have to send it to a shop or someone that does that sort of thing.

If your DBV has an eprom and you want to replace the eprom yourself (usually the lowest cost way to update) you find someone to provide the new eprom with the updated software in it. Then you remove the old eprom from its socket and replace it with the new eprom containing the updated software. Fairly easy. The place linked to above will sell you the new eprom and below is another example:
http://www.jjslots.com/JCM-DBV-200-Upgrade-Chip-V261-ID023-IGT-dbv261.htm

If your DBV has an eprom and you have a device called an eprom programmer then you can burn you own eprom and install it into your DBV head. You'll have to get the software file from somewhere. But getting set up for that may be more cost and hassle than it is worth to you unless you plan to do further work with eproms.

... I believe the bills getting stuck has to do with the transport assy since I replaced it with a spare I had and its doing the exact same thing......

Not clear on whether you replaced the transport and it does the exact same thing, or you replaced the head and it does the exact same thing??
« Last Edit: May 24, 2016, 10:54:06 PM by rokgpsman »
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #17 on: May 25, 2016, 05:54:11 AM »
....I replaced the transport with a spare.

Offline erbarr1

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 4
  • erbarr1 New User has no influence.
  • Gender: Male
  • NLG
Re: DVB 200 eats my old bills.
« Reply #18 on: May 25, 2016, 05:55:51 AM »
Is this the ballast for the fluorescent lights?

Offline Ken

  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2001
  • Reputation Power: 142
  • Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!Ken Is an-NLG GOD!
  • Gender: Male
Re: DVB 200 eats my old bills.
« Reply #19 on: May 25, 2016, 06:22:26 AM »
Is this the ballast for the fluorescent lights?

For the bulb at the top of the main door.

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal