1
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?
« Last post by Stayouttadabunker on Today at 05:01:44 AM »yes...I was changing my Reply to 1270 while you posted.
Welcome to the NewLifeGames.com message forum!
|
1
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Stayouttadabunker on Today at 05:01:44 AM »yes...I was changing my Reply to 1270 while you posted.
2
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by kmarrocco on Today at 04:58:59 AM »Thank you for the quick reply. The battery on the MPU is a new one, it measures around 3.2V. But there are no LEDs illuminated on the MPU when it is powered. I can try reseating the power supply behind the reels and the MPU chips.
3
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Tilt on Today at 04:57:29 AM »044 is for GK/I-games. 1270 is the enhanced MPU for S2000's.
4
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Stayouttadabunker on Today at 04:46:20 AM »Look inside the enclosure where the MPU slides into.
On the back wall inside, there is the backplane board that the MPU plugs into when you slide it in. Maybe take a photo of that circuit board inside, and we can tell you which version MPU replacement you need? The two large, long white connector board headers are the most important ones to take note of and pretty determines what MPU is compatible with the backplane board. Some versions use a long header on top, and a shorter header on the bottom?.... you'll see when you look inside. If they're different length headers (Long & short one), I would recommend what everyone calls a "504" MPU. If the backplane headers are both long ones, then you would need an "1270 Enhanced" MPU. I sort of outlined the MPU enclosure box with some yellow rectangles. Also, I've attached a picture of a 504 MPU...look at the connectors on the bottom of the board. Click on any photo to enlarge if needed...>>> 5
IGT S2000 and Vision Games / Re: S2000 CPU missing -> what is needed?« Last post by Heikka on Today at 04:02:36 AM »The one on right has wrong belly glass. Themes are triple five times pay (3cm) and five times pay (3cm)
6
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by qbert on Today at 03:37:18 AM »Ok you have a 500 series board.
What is the voltage reading of the coin battery? Also when turned on are any of the LEDs lit on the lower mpu? There also seems to be a lot of corrosion on the right side of the board. Things to try: Reseating the power supply behind the reels. Carefully reseating the chips on the mpu. 7
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by kmarrocco on Today at 03:30:14 AM »I am not sure which version the MPU is. Here is a picture of it.
8
Bally Alpha Reel Games / Re: Bally Black and White Jackpot Quick Hits« Last post by kmarrocco on Today at 03:23:13 AM »Thank you for the response. I did already replace both button cells but I can check to see if there could be another one I may have missed.
Regarding the screen, I do not get a no signal message. I will try the bright light test. 9
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by qbert on Today at 02:59:34 AM »Definitely a problem on the bottom mpu.
Is it a 500 series or 1270 board? 10
IGT S2000 and Vision Games / S2000 CPU missing -> what is needed?« Last post by Heikka on Today at 02:01:05 AM »Hi folks!
I just received 2x S2000 games and some parts (including CPUs) are missing. I wonder which CPU I need and which chips needs to be installed to it in order to get these working? Regard, Heikka |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |