Author Topic: TITO @ Home final closeout (Read 25140 times)

bhinkley · « **Reply #20 on:** June 20, 2014, 04:57:32 AM »

Either way will work.

Johnhw · « **Reply #21 on:** June 20, 2014, 05:22:04 AM »

Thank you Brian.. I'm just waiting for the chips. I was told to get an IVC00097 and a Key 45 chip which I have ordered

rickhunter · « **Reply #22 on:** June 20, 2014, 09:18:51 AM »

You don't have to do a clear. Just make sure you have no credits on the machine and key chip it. If you do a clear, it will take you longer to get the machine going. With keychip only, you only have to worry about the SAS settings. If you clear it, you need to go through all the setup menus to make sure they are where they need to be to have a functional machine. So if the machine is working as you want it now, just key chip it to add the TITO function.

Johnhw · « **Reply #23 on:** June 20, 2014, 10:38:36 AM »

Oh ok I didn't realize that, thank you Rickhunter. everything on the machine works as it should. I suppose I'll need the ram clear at some point when I have to change the battery

Thanks again

bhinkley · « **Reply #24 on:** June 20, 2014, 12:08:39 PM »

Just doing the key only is very hit or miss. When testing before releasing the board most of the time it didn't work without the clear

rickhunter · « **Reply #25 on:** June 20, 2014, 12:20:23 PM »

I've been lucky then. I've only done 2 IGT machines and it's worked both times. On the Alpha's and WMS machines, a clear is necessary since you cannot re-do the com settings.

BellaireBob · « **Reply #26 on:** July 06, 2014, 10:03:42 PM »

do you still have unit for igt gk 3902-b?

bhinkley · « **Reply #27 on:** July 07, 2014, 05:37:39 AM »

Yes I still have igt kits.

BellaireBob · « **Reply #28 on:** July 07, 2014, 05:55:46 AM »

i am interested in get 1.what is current cost? and how do you accept payment? paypal,debit,etc?

do you need igt model number or any other info?

bhinkley · « **Reply #29 on:** July 07, 2014, 12:44:02 PM »

Please send me a PM with where it is shipping to get cost. $40 for board + shipping and tax only if going to MN.

BellaireBob · « **Reply #30 on:** July 08, 2014, 06:51:12 AM »

bhinkley your pm is full

bhinkley · « **Reply #31 on:** July 08, 2014, 08:10:44 AM »

Hmm. I don't even have any messages out there. You can reach me with my username on here at gmail.com and I can help you with the order that way

BellaireBob · « **Reply #32 on:** July 10, 2014, 10:33:19 PM »

check gmail.as promised money sent for board.should be able to ship today

bpracer · « **Reply #33 on:** July 24, 2014, 06:42:11 PM »

Picked up the IGT TITO today.

Thanks!

MikeCamp · « **Reply #34 on:** July 27, 2014, 09:47:51 AM »

Do you have any of these left for the IGT S2000s? I might be able to use 2 more.

Mike

bhinkley · « **Reply #35 on:** July 27, 2014, 12:05:23 PM »

Yes I do

Andys35 · « **Reply #36 on:** August 02, 2014, 03:06:58 PM »

Hi .

Do you have still for BB1. Please let me know.

Thanks.

bhinkley · « **Reply #37 on:** August 02, 2014, 04:36:47 PM »

I no longer support any other than IGT and Bally 6000

rjpohl · « **Reply #38 on:** August 07, 2014, 05:06:57 AM »

any one have detailed settings for both alpha and s2000 machines?

tjlee · « **Reply #39 on:** August 07, 2014, 12:54:05 PM »

Hope this helps. Works for me on both S2000 and the Alpha with TITO installed

News:

NLG Site Navigation Menu

Author Topic: TITO @ Home final closeout (Read 25140 times)