1
Bally Electromechanical / 831-4Z payout counter coil not working
« Last post by David Walz on Today at 03:05:23 PM »831-4Z payout counter coil is not working, that's the issue. The coil is fine I checked it out.
The 94 wire Is in the hopper plug #24 position.
The 94 wire is in the reels plug #22 position.
I don't have a wiring diagram W-1046-1838 to trace the wiring in the reels, to locate the defective switch. This machine was in excellent condition, very nice, just cleaned the grease off, it was working fine for a long time.
Anyone who has some information on this issue.
The 94 wire Is in the hopper plug #24 position.
The 94 wire is in the reels plug #22 position.
I don't have a wiring diagram W-1046-1838 to trace the wiring in the reels, to locate the defective switch. This machine was in excellent condition, very nice, just cleaned the grease off, it was working fine for a long time.
Anyone who has some information on this issue.