1
Bally Electromechanical / Re: Bally 809 ZZB Slot machine hopper help!
« Last post by Blainesgames on Today at 03:51:32 AM »Thanks Wolftalk for your help.
Welcome to the NewLifeGames.com message forum!
|
1
Bally Electromechanical / Re: Bally 809 ZZB Slot machine hopper help!« Last post by Blainesgames on Today at 03:51:32 AM »Thanks Wolftalk for your help.
2
Bally Electromechanical / Re: 831-4Z payout counter coil not working« Last post by wolftalk on Yesterday at 10:26:14 PM »for small pays, the circuit probably goes thru an X3 relay switch - possibly wire 43-6 connecting to 94 when the X3 relay is unpowered.
electrically stepped payout on 831's is uncommon, but the only one I have info on the basic circuit is: wire 90 -> payout relay switch wire 84 -> hopper pulse switches wire 43-6 -> X3 relay switch wire 94 -> payout counter step-up coil for the high pays that need the X3 multiplication, it involves the X3 unit and is more complicated. 3
Bally Electromechanical / Re: Bally 809 ZZB Slot machine hopper help!« Last post by wolftalk on Yesterday at 10:08:08 PM »the 809 used an electrically stepped payout counter and your hopper has a mechanically stepped one, so it won't work unless there is also a step-up coil on the unit ... or you add one and the missing pieces along with the switches that the coin out roller arm would activate instead of the spring/linkage there now.
it's probably easier to go hopper hunting again :-( 4
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: PE+ Fuse Holder« Last post by Chris-socal on Yesterday at 09:28:03 PM »That will work as long as the video problem really is the monitor.
Good luck and let us know what you find out. 5
IGT S2000 and Vision Games / Re: S2000 VFD Question« Last post by Tbone_josh on Yesterday at 09:05:02 PM »Here's the photos of the rear of the VFD with the controller.
6
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTS - IGT IPC Controller (2 units available)« Last post by NorCal Slots on Yesterday at 07:35:09 PM »1 left…
7
IGT AVP (Including G20,G23) / Re: IGT G20 slot machine« Last post by paspedaggi on Yesterday at 07:20:24 PM »Got it. Thank you so much.
8
IGT AVP (Including G20,G23) / Re: IGT G20 slot machine« Last post by Tilt on Yesterday at 07:10:19 PM »9
IGT AVP (Including G20,G23) / Re: IGT G20 slot machine« Last post by paspedaggi on Yesterday at 06:45:25 PM »I guess I need that key how do I reach out to RB?
10
IGT AVP (Including G20,G23) / Re: IGT G20 slot machine« Last post by Tilt on Yesterday at 06:01:17 PM »It's a diagnostic program on a USB drive. You need that along with your ekey7 to clear NVRAM, Safe storage, and to wipe the hard disk. Don't wipe the hard disk though unless you have the OS and game loaders for your machine. It also lets you run additional diagnostic programs to test various machine functions (lamps, buttons, etc).
Member RB here can get you a diag if you need it. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |