New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: E2000 Not working, only power to lights and fan  (Read 1246 times)

0 Members and 1 Guest are viewing this topic.

Offline pjbanman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 3
  • Reputation Power: 0
  • pjbanman New User has no influence.
  • Gender: Male
  • NLG
E2000 Not working, only power to lights and fan
« on: February 18, 2018, 03:43:14 PM »
Hello All,
I just bought a Bally E-2278 5 cent slot and it is not working.  The lights and fan power on but the LED display is blank and apparently power is not going to any boards?  I tested loops on the power supply board and there is no power on the 3 test points.  All the fuses are good, is there a way to test to see if power is coming into the board before I look into buying a power supply board?

Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: E2000 Not working, only power to lights and fan
« Reply #1 on: February 18, 2018, 05:02:17 PM »
even though the fuses check good - could be a bad fuse holder.  on the power supply the bottom 2 wires blue/yellow?  i believe is the 10v input and that connection usually go bad .

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: E2000 Not working, only power to lights and fan
« Reply #2 on: February 18, 2018, 05:53:34 PM »
Remove the power supply plug and check the header it plugs into for any burnt pins. If burnt you may need to replace the connector.
Your power supply has a IDC connector. Get a thin blade screw driver and press each of the wires firmly into the IDC blades on the connector.
IDC = Insulation Displacement Connector.
Worst case, if there is  burnt pin, I can make you a Molex connector that will plug into the power supply header and you can cut off the IDC connector and wire nut in the new connector.
Let them that don't want any, have memories of not getting any.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: E2000 Not working, only power to lights and fan
« Reply #3 on: February 18, 2018, 08:18:35 PM »
I would remove your fuse block assembly and check the fuse holders. I have had some go bad inside where the can connects. Also make sure to check the fuses with a meter. I have had fuses look good, but test bad on my meter. Lastly check the condition of the machines power cord where it goes under the machine. I bought a machine once where the seller said it quit working. I found two of the 3 power cord wires broken under the machine.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline pjbanman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 3
  • Reputation Power: 0
  • pjbanman New User has no influence.
  • Gender: Male
  • NLG
Re: E2000 Not working, only power to lights and fan
« Reply #4 on: February 18, 2018, 08:52:41 PM »
Removed fuse assembly and everything tested good, thank you Amechanic.
GOS you are correct Wire 1 and 2 or the Blue/yellow wires are the power wires, thank you!
Removed the power supply plug by transformer and ohmed out  blue/yellow wires from plug to idc connector, open circuit.
Pushed wire into IDC blades, ohmed out again, and WALAH!!, we have a connection. Put connectors back, plugged in and flipped the switch, we have power!!  Thank you Badbaud!!


Put coins in and solenoid activated by lever, pulled lever and everything worked! Yay!! Hopper turned for a while and TILT light came on, I wonder if it is because I don't have coins in the hopper? 


Glad to get to this point, I will work on it some more tomorrow and will try to proceed further.
Thanks everyone for your help!

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: E2000 Not working, only power to lights and fan
« Reply #5 on: February 18, 2018, 09:22:36 PM »
If you hit a payout and didn't have enough coins in the hopper it will tilt and should show a code 31 or 32 I forget which one. You will need to clear the tilt with the reset on the hopper board.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline pjbanman

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 3
  • Reputation Power: 0
  • pjbanman New User has no influence.
  • Gender: Male
  • NLG
Re: E2000 Not working, only power to lights and fan
« Reply #6 on: February 18, 2018, 09:32:29 PM »
Okay, I'll try it. Thank You!

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal