Hi All
I haven’t been active on the site for some time now, but could use some assistance, seems I may have gotten in over my head this time. I just got my first BB1 and am not familiar with this platform at all. My problem started just the other day the machine was playing fine, I hadn’t used the ticket printer, so I tried it and the ticket printed fine. The next time I boot the machine up I get call attendant in the blue box, on the bottom of the screen in middle restart and to the right BVSD. When I open the door I then get the printer com error. The printer is a GEN 2, it has tickets in it but the indicator lights says READY and a head open light is on, it is not. In my tinkering I found that the flag on the printer head may have wiped out the sensor that tells it the head is closed. Most likely need a new ticket printer. Sorry about being long winded I thought I saw on the site where one can set the machine to all hand pays and bypass the printer until I can locate another. If so any help would be appreciated. Will I need a clear chip (card), I don’t have anything for this type of machine. In the future I am considering game changes. Again any help is much needed, I can post pictures if needed.
Thanks Brian