New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Ah yea not heading that way.
I am driving towards Reno, Las Vegas, and Phoenix in about a month if that helps move it!!

Let me know
22
IGT S2000 and Vision Games / Re: S2000 Vision battery replacement issues
« Last post by MB75 on Yesterday at 12:50:47 PM »
Yes for sure  :yes: was my next step to remove it.

That’s why I was wondering which chip needs to go.

Will try to resize some pics, they are all in high resolution  :banghead:
23
IGT S2000 and Vision Games / Re: S2000 Vision battery replacement issues
« Last post by lookes on Yesterday at 12:43:34 PM »
I've repaired several 500 boards. I just did a REV D last week. They are just early 500 series boards. I've seen REV C's too. That board will work fine in his machine since the audio comes from the top box I believe.
I actually do have an audio rework that makes then nearly as quiet as 504's tho. lol...   Without it, they are useless and noisy with an MML2. Worse than 501's.
24
You do understand that the Varta is not needed for a machine at home?
It's what they call a "telltale" battery...it "tells" the casino that someone was messing around with the machine while it was OFF.
There's an onboard chip that's part of the re-charging system.

Now's a good time to take a high resolution photo of that particular area of the circuit board, and post it in your next Reply.
There are experts here that will tell you what to do next by taking one look at your photo.

Personally, I've never seen an S2K 500 MPU, although I've heard they exist.
I've only played around with the 502, 504 and newer MPU's.
It sounds like your MPU is one of the older MPU versions, and could very well be hitting over 20+ years old.
That could explain why it's acting weird....it may of said "I've had enough!"  haha

25
IGT S2000 and Vision Games / Re: S2000 Vision battery replacement issues
« Last post by MB75 on Yesterday at 11:57:24 AM »
Thanks for the detailed reply.

i will try to explain what's happening.

I bought the machine and was fully working. Occasionally I got some messages like closure MB but after open and closing the door they go away.

After the machine was off for a week I got a variety of errors. Display went on and of and the machine was tripping a bit. I left is for a couple of minutes like this and after I while I restarted it by powering it down and up and then it worked.

Thinking of a memory issue related to a bad battery I measured the Varta after it was off for 2 days. The battery was 1,5v

Powered it up and left it for 10 minutes. After that I measured again with a powered down machine and it was 4 v.

That was the reason why I wanted to have a better investigation on the battery and battery area.

Strangely at the moment I started desoldering the Varta it was about 2,5v. When it was off the board an laying around for an hour the voltage went up to eventually 3,7 volt.

It looks like there is something making a shortage on the board or components.

So battery replaced with a pack which not worked and then installed a new varta. Needed to reboot several times to get the machine out of it errors and to start the netplex auto config.

At this stage all reels spin like they should.

Since it was still giving some errors I finally needed to reboot again and then the problems with the reel 5 starts.

This tells me that there's nothing wrong with the harness.
Just to make sure I performed some of the mentioned steps like switching the reels 4 and 5. Problem remains on 5.
Since the problems started after it performed the netplex auto config I assume the problem is somewhere in the config or software related.

What components could make these strange issues with the varta battery ?
Why is it charged that quickly and discharging in a couple of days ?

About the board, unfortunately there are no tags on it anymore. I only have the part number on or actually in the board itself.
It is the 75510500 rev D

maybe with this we can check what chip needs to be removed. U16 or U79 ?

27
Where are you located?
28
WMS Williams Video / Re: My must list for converting the BB3 for home use.
« Last post by Newbooty on Yesterday at 11:33:58 AM »
Oh yeah you are 100% correct, a surge protector is a must on all electronic equipment.    I was using the surge switch also, but I wanted a direct switch to the power supply.  I completely dumped the metal cover holding the old switch.  I could just see that cutting wires by taking it off and putting it on all the time while messing around in the cabinet.
29
Definitely would be interested, unfortunately way to far away. Gorgeous machine.
30
WMS Williams Video / Re: My must list for converting the BB3 for home use.
« Last post by sixcardmark on Yesterday at 10:29:57 AM »
2nd #1: Just get a good surge strip and use it to turn machine on and off and protect it at the same time.
Pages: 1 2 [3] 4 5 ... 10

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal