New Life Games LLC

**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: puckhead on April 14, 2017, 04:37:14 PM

Title: jennings mark 2 gov - plastic inserts and lights question
Post by: puckhead on April 14, 2017, 04:37:14 PM

i need new plastic inserts for the front door, mine are ratty. anyone know where to get them? also, the orig fluorescent bulbs are missing. i think i may want to go low voltage LED.  has anyone done that? if not, are the orig style bulbs available? pics to follow. whenever i try to post pics in the orig post, i get an error, even with tiny file sizes.

thanks

Title: Re: jennings mark 2 gov - plastic inserts and lights question
Post by: puckhead on April 14, 2017, 04:41:57 PM

cant post pics,get a fatal error even with a 538k file size.

Title: Re: jennings mark 2 gov - plastic inserts and lights question
Post by: Chief on April 14, 2017, 06:58:56 PM

Howdy,
   Please give measurements of panels needed. I have a couple sets , if they will fit.
               Chief

Title: Re: jennings mark 2 gov - plastic inserts and lights question
Post by: puckhead on April 15, 2017, 07:36:09 AM

they are 8 5/16 X 2 13/16.    the backside is silkscreened red with an opaque  masking, much like a pinball backglass.  the ink is scratched up and looks crappy lit up.  in a pinch i think i can remove the ink and put some kind of red film backing on it, but id prefer not to.

thanks

Title: Re: jennings mark 2 gov - plastic inserts and lights question
Post by: Chief on April 15, 2017, 06:56:14 PM

Howdy,
     I measured my replacements &  they will not fit your machine. I would have your plastic  bead blasted so they become frosted white & then put a transparent colored sheet of thin plastic behind them , for a new and Great look.
                           Chief