New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: IGT S+ burnt component Q-5 and Q-6 on the mpu board  (Read 8862 times)

0 Members and 1 Guest are viewing this topic.

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #40 on: July 02, 2017, 09:41:26 AM »
The display board has metal traces (circuit paths) that connect to the various parts on the board, such as connectors, sockets, etc. Sometimes something wrong will connect a trace to another trace in a way that causes a short circuit. For example, a glob of solder or a bulb holder that is damaged and twisted wrong. If your mpu Q5 &Q6 burned up because of something shorted then whatever caused that could do it again to the next mpu board. If you believe that the display board and the wiring going to the pushbuttons are ok then you can try another mpu board to see if the machine is ok now.

Since you said the machine was working ok, the only repair you have done is to replace the TEST switch, then perhaps Q5 and Q6 just burned up on their own. My experience tells me that is not likely but maybe that's what happened. Even if it did happen that way the smart approach is to examine things in the machine that might have caused the burned parts before installing another mpu board.

Do you have another mpu board or another similar machine available?
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #41 on: July 02, 2017, 10:28:39 AM »
Sorry. I don't have a extra mpu board. I have order a new mpu board fore  1 week ago...

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #42 on: July 02, 2017, 10:33:40 AM »
Sorry. I don't have a extra mpu board. I have order a new mpu board fore  1 week ago...

Good luck, hope that takes care of things! 

I thought from your previous posting this year and last year that you had more than 1 IGT slot machine? Were those other posts about problems for different machines than this one?
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #43 on: July 02, 2017, 11:15:01 AM »
I had 2 before... but them are sold becaus i have removed to a small apartment and i don't have enough space fore 2 machine's...

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #44 on: July 02, 2017, 11:16:32 AM »
Ha! running out of room for the hobby happens here too!  (@shortrackskater)   :garfield:
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline shortrackskater

  • Mark
  • NLG Site Administrator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3945
  • Reputation Power: 263
  • shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #45 on: July 03, 2017, 09:31:32 AM »
Ha! running out of room for the hobby happens here too!  (@shortrackskater)   :garfield:

 :I_agree_1:
Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #46 on: July 03, 2017, 10:28:47 AM »
That's now why he's rebuilding old pay phones.. Don't take up as much room and you can hang them on the wall..  :Crazy: :wave:   :hijacked2:  (Shortrackskater)...
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #47 on: July 11, 2017, 12:19:59 AM »
So the Q5 are to the insert coin lamp/ bulb, and the Q6 are to door open/ top candel light?

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #48 on: July 11, 2017, 09:43:59 AM »
So the Q5 are to the insert coin lamp/ bulb, and the Q6 are to door open/ top candel light?

As shown back in reply #36 Q5 is connected to the Insert Coin lamp and Q6 is connected to the Door Open lamp.

Did you receive your replacement mpu board that you ordered?


partial schematic of mpu board, click to enlarge:


If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #49 on: July 12, 2017, 02:24:24 AM »
Where are the door lamp on the machine? Yes, I receive the mpu board today. But I have to go to the post Office to get it

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #50 on: July 12, 2017, 05:05:36 AM »
I have checked the display board now. No burn marks on it...

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #51 on: July 12, 2017, 06:17:16 AM »
I don't know where the "door open" light is located. (perhaps on some machines it wasn't installed??) Maybe someone that is more familiar with the IGT S+ can say for sure.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #52 on: July 12, 2017, 06:52:10 AM »
I checked the candel light to. The was no blub inside on it... I have to find out where the door lamp are on my machine

Offline shortrackskater

  • Mark
  • NLG Site Administrator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3945
  • Reputation Power: 263
  • shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!shortrackskater Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #53 on: July 12, 2017, 09:16:53 AM »
Q5 goes to the display board. I'm not sure where Q6 goes?  The two things that change when the door is opened is the lower candle light flashes and the coins played light goes to 0.
Where's Stayouttadabunker and Roz when we need 'em?

There is no door open light on the s plus, at least not on any of my three!
Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #54 on: July 12, 2017, 09:20:26 AM »
The candle usually has 2 bulbs and bulb holders in it. Maybe Q6 is connected to the lower candle bulb and it is what they call the door open light, and the mpu flashes that light when the door is open.

The wiring that goes to the candle will be inside the top box of the machine and pass thru a hole in the top of the machine up into the candle. Check the wiring to make sure it is not pinched or damaged.
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #55 on: July 12, 2017, 09:28:36 AM »
The wire are not damage. I take out the contack to the candel light inside of the top box since they dont have the blub bulb  in to it
« Last Edit: July 12, 2017, 09:37:18 AM by shortrackskater »

Offline Stayouttadabunker

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 5426
  • Reputation Power: 405
  • Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #56 on: July 12, 2017, 10:56:22 AM »
http://www.mouser.com/ProductDetail/Littelfuse/L401E3/?qs=zGlVML%2FQOnPOqQfosAufWA%3D%3D

Above is a link to Mouser.com in the States for some L401E3 triacs for the Q5 & Q6 locations.
You may be able to get them quicker & cheaper from China since you're on the other side of the pond.
The little suckers are $1.17 ea. @ mouser here.  :rotfl:

Simply UN-solder the burned LittleFuse triacs and solder in the new ones. Piece of cake.

I'd undo the harness Molex & remove the candle from the topbox before installing your new MPU to be on the safe side.
Check the 4 wires from the candle with a multimeter set on continuity BEFORE re-installing with correct lamps.

You can find out what lamps you need to use for your S+ here on NLG.

Good luck! :)



Remember, the more you tell us - the better we can help you!

Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline Cashen87

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 418
  • Reputation Power: 33
  • Cashen87 Is working their way up.Cashen87 Is working their way up.Cashen87 Is working their way up.
  • Gender: Male
  • NLG
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #57 on: July 12, 2017, 11:23:09 AM »
I get a new mpu board today. And this board work perfeckt...
 

Offline rokgpsman

  • Resigned NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4963
  • Reputation Power: 278
  • rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!rokgpsman Is an-NLG GOD!
  • Gender: Male
  • Just a curious observer...
Re: IGT S+ burnt component Q-5 and Q-6 on the mpu board
« Reply #58 on: July 12, 2017, 12:08:55 PM »
That is good to hear, congratulations!  :odie:

Can you mark this topic closed?
If you've benefited from this website or been helped by the friendly NLG folks that volunteer their time please make a donation of any amount to help keep the website running. Thanks! Donate Here

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal