New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: SG-300 YAHTZEE slot  (Read 13072 times)

0 Members and 1 Guest are viewing this topic.

Offline mustangjeep

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 189
  • Reputation Power: 13
  • mustangjeep New User has no influence.
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #20 on: November 21, 2014, 11:25:21 PM »
I looked into that, the section your reading is for a machine that is set with special jurisdiction requirements.
If your machine is has an "02" on the GAL chip then you'll need the clear chips.
Look at the diagram on the page and that should help you find out if you indeed have one of those machines.

 

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #21 on: November 22, 2014, 05:47:03 PM »
Here are some pics i took of the top inside..

Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #22 on: November 22, 2014, 05:50:57 PM »
i will post a link to youtube later so you can see what it is doing..

its not a realy good video because it hard to do by your self with a cell phone..

Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #23 on: November 22, 2014, 08:01:17 PM »
think i figured it out,

needs a new MPU board..

found a couple IC chips that are burnt.

Any one have one they want to sell..

SG88M-2
120002 REV B

Found one on rudys deals...

hoping to get one a little cheeper..

any on want to sell let me know...
Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #24 on: December 07, 2014, 04:25:55 PM »
well i got the new board ...

still dose the same thing.,..

i get no lcd and the reels slowly spin 1 to 3  times some times.. somtimes just once when truned on..

 and thats it..

one of the top dice keep spinning,,,

i have tryed the reset like you said with the reset key and press test button and hold while you tun on..

still nothing on lcd and dose nothing more..
Thank you..

Mark Evans

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #25 on: December 07, 2014, 05:50:37 PM »
Just a quick question.. Have you check your voltages from your power supply?

Gary
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #26 on: December 07, 2014, 06:20:36 PM »
yes i have checked all 3 power supplys..

they are all good voltage.

i checked them also on the plug going to the board.

im geting 12v 24v 5v.
Thank you..

Mark Evans

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #27 on: December 07, 2014, 06:58:46 PM »
Ok it was just a thought.. I know that some if these power supply's can drop one of the voltages, like the 5v and that could cause your display not to power up.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #28 on: December 07, 2014, 07:08:27 PM »
Yea I think it has to do with power some where or a short some where...starting unplugging cables off the board. And got a 0 in the coin in lcd when I unplugged the big ribbon cable that goes to the door board. Will keep looking more into the plugs.. and connection
« Last Edit: December 07, 2014, 08:34:21 PM by drfreeze1739 »
Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #29 on: December 08, 2014, 09:09:42 AM »
Ok. Now I think my issue is that I need to find out how to get that one dice up top to stop spinning.it stopped once last night and I got it to play once until I restarted the machine.still no blue lcd... Mabey that is burnt out. I had all lcd working once.. any suggestions  I could try would be great. Going to test power supply under load and see if it Is dropping voltage. I think it's dropping voltage. Because it dose more with the bill validator unpluged...  with it unpluged I can get the reels to set when I close the door...
Thank you..

Mark Evans

Offline Sunrise Side

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2568
  • Reputation Power: 164
  • Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!Sunrise Side Is an-NLG GOD!
  • Gender: Male
Re: SG-300 YAHTZEE slot
« Reply #30 on: December 08, 2014, 11:36:15 AM »
On the top inside boards and all other boards, did you reseat all the chips on the boards? Even the square chip with pins on all four sides.

Offline mustangjeep

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 189
  • Reputation Power: 13
  • mustangjeep New User has no influence.
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #31 on: December 08, 2014, 01:27:23 PM »
I just got all three of  sg-150+ games working, and sounded like a similar problem.
The were stuck in a check mode on start up, I shade to turn off dip switch 4 and 10.
I would check and see if your dip switch that checks for the hard meter is turned on, if it is turn it off.
Fixed my games and might be worth a try.

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #32 on: December 08, 2014, 02:14:13 PM »
No I didn't check all chips. Just the game chips. I will reset all the chips I can when I get home later. Thank you sunrise. And mustang I will check dip switches adan. I just set them my the manual last night. On the dip what switch block because there is 2 of them sw1 and sw2. 
Thank you..

Mark Evans

Offline mustangjeep

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 189
  • Reputation Power: 13
  • mustangjeep New User has no influence.
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #33 on: December 08, 2014, 02:35:47 PM »
Unfortunately I've already sold all my sigmas. And gave the guy my manual too, but I think it was switches 1-4 and 2-10 I think.
It should say in your manual.
Look for the hard meter check and turn if off, I think 2-10.

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #34 on: December 09, 2014, 09:07:19 PM »
ok. up date..

checked all the dip switchs.

all good. hard meters off..

had it working some how still  no bottom lcd. not sure how..

it would bills and coins.. it would play and win...

then i hit yahteez play and nothing would work...

turned off machine and it has not worked again since..

very stumped...
Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #35 on: January 29, 2015, 05:36:54 PM »
update on this machine.. Its been a while..

got new board and new bottom blue LCD..

now i can see the error it is giving....

it say bonus error - comm..

all the dice at the top spin when first turned on then they all stop..

can not get rid of this error..

i have tryed to do a reset on the machine and it still dose the same thing..

i can go through all the setting on the lcd and system setting time and date..

Thank you..

Mark Evans

Offline drfreeze1739

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 737
  • Reputation Power: 64
  • drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!drfreeze1739 Is a rising star!
  • Gender: Male
  • NLG
Re: SG-300 YAHTZEE slot
« Reply #36 on: February 06, 2015, 10:37:33 PM »
well tryed replacing the power supply that runs the bounce part..

still no change....

it all powers up goes through the  testing.

reels test spin.. but still get the bounce error and thats as far as i can get it..

any one can help that would be great..
Thank you..

Mark Evans

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal