Author Topic: Name that Bally's (Read 7006 times)

capt7310 · « **on:** October 13, 2016, 10:57:30 AM »

Hello, after my 831 failure I just came across this ballys and I think it's a Low Boy 742-794 not really sure. Can anybody ID it.

Jon · « **Reply #1 on:** October 13, 2016, 11:09:14 AM »

Open the door and get a good picture inside I am thinking it is a 9:55 I have two of them

OldReno · « **Reply #2 on:** October 13, 2016, 02:23:55 PM »

Pretty sure its a retrofit. But that's not a bad thing.
Very nice looking machine.
Plz more pics of inside...?

Amechanic · « **Reply #3 on:** October 13, 2016, 06:49:06 PM »

Looks like a 955, but what has me puzzled is the win meter? I have a nice MGM Grand 955, but mine does not have a win meter...

Gary

Jon · « **Reply #4 on:** October 14, 2016, 01:42:06 AM »

Very good eye garry I have to 955 neither one has a wind meter would sure like some pictures of the inside of that machine

Jon

Amechanic · « **Reply #5 on:** October 14, 2016, 01:53:14 AM »

Capt... Can you provide a few more pictures of that machines inside?

capt7310 · « **Reply #6 on:** October 14, 2016, 03:36:50 AM »

The guy I'm trying to purchase this machine from takes forever to get back to me I've sent him several emails and 2-3 days later he responds back... he's at a 100 bucks for it but I don't know if it has keys or if it even works, I've been looking for a Low Boy but I don't want to cart away his garbage either, he just keeps telling me it's a family heirloom that's been sitting around for years and just wants it gone, but he can't be in that much of a rush he never gets back to me. These are just a few other pics he sent me, and I think the belly glass is to the top of a machine so I agree with Reno there might be some retrofitting... I will keep everyone posted

Jon · « **Reply #7 on:** October 14, 2016, 03:46:31 AM »

At $100 even if it doesn't work it is well worth it it is a beautiful low boy

Worst case you'll just have to make the 13-hour Drive bring it over here spend the night will fix it the next day then drive home

Amechanic · « **Reply #8 on:** October 14, 2016, 08:48:56 AM »

I agree with Jon, the price is right. Low boys are hard to find. The glass looks great too. I'd buy it..

Gary

Jon · « **Reply #9 on:** October 14, 2016, 09:46:42 AM »

Gary where do I post this machine for CPU questions
I know it's way off topic in here but I've never seen an Australian made IGT

Amechanic · « **Reply #10 on:** October 14, 2016, 11:19:59 AM »

Jon I'm not 100% sure my self. I would just put it under the General Chat section.

http://newlifegames.com/nlg/index.php?board=74.0

Or in the early IGT M section. Are you sure that's not a Aristocrat?

capt7310 · « **Reply #11 on:** October 14, 2016, 03:43:47 PM »

Ok here's the deal I'm going to get it tomorrow for 50 bucks because they don't think it works and they can't find the keys. So is it a go

Amechanic · « **Reply #12 on:** October 14, 2016, 04:26:58 PM »

Quote from: capt7310 on October 14, 2016, 03:43:47 PM

Ok here's the deal I'm going to get it tomorrow for 50 bucks because they don't think it works and they can't find the keys. So is it a go

That's a great deal... Drill out the lock, or stop by a lock smith on your way home. They should be able to open it.. You can get your self a new lock for $10 to $15.00. Keep us posted..

Gary

DavidLee · « **Reply #13 on:** October 14, 2016, 05:06:37 PM »

Great deal!
From looking at the photos, it looks to be untouched as far as being worked over a few times.
Evidence being tar and nicotine stains on the chrome, suggesting straight out of a casino and untouched.
But the inside will give you a better scene of the machine.
If the lock appears to be original and it's not expensive, I would go for a key being made.
The new locks are not of the quality like the locks from the 60s, and I've found there is some adjusting and or tweeting when installing modern locks.

Since the machine has not been opened since who knows when.
How about splitting the contents 50/50 for the person with the closest guess.
Just kidding hope you get your money back.

My guess would be $14.75

Amechanic · « **Reply #14 on:** October 14, 2016, 05:14:45 PM »

I think its going to be higher.. $22.50. Heck the change inside should pay for the lock smith. Make sure that you get every quarter out if the machines bottom before trying to power it up. Dig behind the transformer and safety time in the back left.

Gary

jimliner · « **Reply #15 on:** October 14, 2016, 06:33:27 PM »

Higher. $50. 200 quarters ain't a real lot in hopper. Especially if its been locked.

If possible transport upright, not on its back. Regardless of orientation, always protect the glass when moving.

capt7310 · « **Reply #16 on:** October 14, 2016, 07:30:10 PM »

I'm picking it up in the AM I'll keep you posted. I'm going with nadda. Pics tomorrow hopes it's a score!!!!!

capt7310 · « **Reply #17 on:** October 15, 2016, 05:55:18 PM »

Hey everyone OK got it and I'm pretty psyched it's in great condition. The locked was drilled out and sorry there was only 2 quarters in the hopper. I did plug it in and only some of the lights work, and I did check the bulbs and they all work. The fluorescent bulb doesn't work either. It hasn't been used in about 15-20 yrs the owner told me so he just wanted it gone. It definitely has a lot going on and I'm hoping to get it fully functionable. Dave, Reno, Jon, Amechanic and everyone get ready. I hope I don't fail on this one it's really awesome. Here are some pics

capt7310 · « **Reply #18 on:** October 15, 2016, 06:19:48 PM »

PS it is a 955 it's stamped on the inside. I did find one bad fuse and the coin mech did click in and out now. But hoping a good cleaning can get the electrical contacts working again.

DavidLee · « **Reply #19 on:** October 15, 2016, 06:58:04 PM »

Nice machine, glad you got it.
A good cleaning should do wonders for the machine. If the ends of the fluorescent tube aren't real dark, try cleaning the pins. I like using a sharp blade which leaves little burrs. These burrs clean and help make contact with the socket clips. Replace the lamp and giving it a few twist back and forth with the machine on. Sometimes it take awhile for the lamp to light up. I've almost given up on lamps and suddenly it will work.

Have fun working on your new project.

News:

NLG Site Navigation Menu

Author Topic: Name that Bally's (Read 7006 times)