Author Topic: IGT S + Problem with sp1137 (Read 4479 times)

Cashen87 · « **on:** March 03, 2017, 09:56:08 AM »

Hello. I have some problem with my sp 1137 chip. I have use the set086 and setup the machine step by step. Always when I use the handel or spin reels the machine spin but It always stop on "blank" all times. Are the some seting I have forgot since it not stop on any symbol at all. Are the some payout % you can set up to the machine to win on the sp1137

Shaggy · « **Reply #1 on:** March 03, 2017, 10:32:43 AM »

What is the machine name and number of coins it takes?

Cashen87 · « **Reply #2 on:** March 03, 2017, 10:42:42 AM »

I have 2 igt s plus machine with the same problem. They don't have bill validator. I have double double diamond and red white and blue wildstar. They are 3 coins bought

Cashen87 · « **Reply #3 on:** March 03, 2017, 11:20:33 AM »

So its it a issue ~~whit~~ with my machine or the chip. Its work perfect when I instal it and now, the reel stops always on blank and no symbols at all

Shaggy · « **Reply #4 on:** March 03, 2017, 11:24:29 AM »

Are you putting credits on to play or just repeating the bet? Try pushing the bet 1 credit and then spin the reels. Are both machines doing this?

Cashen87 · « **Reply #5 on:** March 03, 2017, 11:47:58 AM »

Yes. I puting one tokens to get 99 credits. When I start the game push the spin reels its always stops on blank every times. I don't know whay they always stop on blank

Shaggy · « **Reply #6 on:** March 03, 2017, 01:29:14 PM »

What happens when you push Play Max Credits? You may have to push Bet 1 Credit 3 times then hit Spin Reels.

Cashen87 · « **Reply #7 on:** March 03, 2017, 02:16:33 PM »

Nothing happening. Its go to blank every times. I want to go sp1271 again

Cashen87 · « **Reply #8 on:** March 04, 2017, 06:49:58 AM »

What option are you use on the sp1137, shaggy?

Shaggy · « **Reply #9 on:** March 04, 2017, 07:42:21 AM »

I have mine set to token credit (7) and token value 99 (15). You said your machine was working perfectly at first. Did you try to change something and then the machine quit working?

Cashen87 · « **Reply #10 on:** March 04, 2017, 08:16:57 AM »

No. Its like the machine doesn't want to give you payback at all

Shaggy · « **Reply #11 on:** March 04, 2017, 09:23:12 AM »

If it was mine, I would start all over again. Or change back to the SP1271 and see if it still acts like this.
If the other machine is working correctly, take the MPU board out of it and try putting it in this machine. Then see if it spins correct.

Cashen87 · « **Reply #12 on:** March 04, 2017, 09:37:11 AM »

Okey. I will try that

Cashen87 · « **Reply #13 on:** March 04, 2017, 09:42:30 AM »

What are you have on the dip switch seting. Mine are 1 off and 2 to 8 on

Ken · « **Reply #14 on:** March 04, 2017, 10:30:02 AM »

1, 2 and 3 on

4 - 8 off

Cashen87 · « **Reply #15 on:** March 04, 2017, 10:40:32 AM »

Oki. So that are the seting on the dip switch fore the sp1137 chip

Ken · « **Reply #16 on:** March 04, 2017, 11:01:33 AM »

That's what I set every S+ 10MHz board too and I just tested an SP1137 this morning with those dip switch settings.

Cashen87 · « **Reply #17 on:** March 04, 2017, 11:23:45 AM »

Okey. So then my machine want works like it should because mine dip switch are 1 off and 2 to 8 on?

Ken · « **Reply #18 on:** March 04, 2017, 11:27:07 AM »

Can't hurt to change them. If it doesn't work you can always change it back.

Cashen87 · « **Reply #19 on:** March 04, 2017, 01:01:44 PM »

Stil no change

News:

NLG Site Navigation Menu

Author Topic: IGT S + Problem with sp1137 (Read 4479 times)