Igt s+ setup issue

[RONR11]

just did a clear on a s+ and settings say to push test button 3 times and it will go to 5 in the window, however mine goes to a 10.  1 in the win window and 3 in the coin window. Anybody have this problem before?  Thanks Ron

[Shaggy]

Are you using the correct PSR for your SPchip? Some of them setup a little different depending on the game and type of game chip you're using.

Dave

[RONR11]

You were right Dave,  thanks for reply it did have a different chip and I was following the other setup. This is
A Louisiana Louie and not sure how the reels stop. Sometimes they seem to stop in between. Thanks again for your help.  Ron



 

[RONR11]

New problem now. When I get a win. It goes to credit window along with all zeros and the chimes keep chiming?  Was ok till t
I replaced the bulb in the cash out button.  Thanks Ron

[Ken]

Sounds like the hopper limit needs to be increased in section 7 of the setup.

[RONR11]

Thanks for reply Ken,  I have the hopper set to 0000 and if I read correctly that should take wins to credits.  I just rechecked my settings to b sure.

[Ken]

all zeros causes the problem you are having.

Set it to 1000.

[RONR11]

I want to thank all replies and did find the problem. Ken mentioned on a old post about some cash out buttons   wired differently on this chip so I set my 5-0 settings to 5-2 and it worked.  I thought I had installed them back on the button right but I changed wires and I'm up and running.