Author Topic: S-Plus New Owner (Read 23613 times)

NHBFan · « **on:** December 10, 2016, 09:13:19 AM »

Hello guys! I Just bought IGT slot machines and no ideas what to do with that. At first i have to get know what the model it is. I suppose IGT S+ but who knows.
Help me to recognize it please by pictures

Shaggy · « **Reply #1 on:** December 10, 2016, 11:47:11 AM »

Welcome to NLG. Yes your MPU board is a 10Mhz S+ board. Post some pics and tell us what is going on.

Dave

NHBFan · « **Reply #2 on:** December 10, 2016, 11:58:02 AM »

Thank you!
The problem is i just bought it and i`m not an expert at all. i`m from country where are not people who can say they are so good in american slot machines.
so i just started to explore this forum

first at all as i understand i need to replace the battery and then clean memory. Right? When i will do it i will revert with pictures for next step advices )

rickhunter · « **Reply #3 on:** December 10, 2016, 01:46:14 PM »

Post pictures. Are you getting any kind of number on the reel glass. You need to change battery if you are getting a 12 in the winner paid window. Here's a link for IGT S+ new owners. Go over it and let us know what questions you have.

http://www.newlifegames.net/igterrors/

http://www.newlifegames.net/spset/gamechange.htm

NHBFan · « **Reply #4 on:** December 11, 2016, 06:41:45 AM »

Soryy for my stupidity guys
Disaster happened. I damaged the chip during removing from board. Is it end?
Is it possible to get information from it and burn to blanc chip?

therockinelvis · « **Reply #5 on:** December 11, 2016, 06:51:45 AM »

If you are very, very, careful, you can straighten the legs. I use just my fingernail, but sometimes a very small set of needle nose or tweezers. If one breaks off, you will need to get a new one. Not every machine needs a clear after changing battery. Normally only if stuck in the "61" loop. This is usually caused by someone turning the jackpot reset key, thinking it is magic and will clear code 12. Not the case at all, only makes more work. Good Luck and let us know if you need more help.

NHBFan · « **Reply #6 on:** December 11, 2016, 07:00:01 AM »

But if i need a new chip. Where i can buy absolutely the same?
Where i can get information about type of my chip to make a request? you can see top of my chip at picture. My slot machine is Hot Peppers

therockinelvis · « **Reply #7 on:** December 11, 2016, 07:19:34 AM »

Was your machine working properly before? You have a SS chip for Homerun instead of Hot Peppers. You can go to the NLG Home page and find a list of vendors. I am guessing it is the SP114 that you have damaged, since you were maybe attempting a clear. You can also get the proper SS chip. SS4211, SS4080, SS8806

NHBFan · « **Reply #8 on:** December 11, 2016, 09:51:52 AM »

I took it from some guy who kept it in his apartment about 10 years. The battery gives voltage zero. So i cant say if it was working or not. I was not able to move ahead 12 error.
And now this situation with chip damaging...
So i have wrong SS chip. What does it mean? Reels do not spin proper? Or it will not work at all?

I would like to buy a proper SS chip for my board. How to find a vendors on home page? put up a notice?
Chip information from ebay seller. How to understand which one is proper for my board?

Quote

4703 0 97.433 HOT PEPPERS 2CM
4704 0 95.134 HOT PEPPERS 2CM
4705 0 92.541 HOT PEPPERS 2CM
4706 0 90.058 HOT PEPPERS 2CM
4707 0 87.577 HOT PEPPERS 2CM
4710 0 95.070 HOT PEPPERS 3CM
4711 0 92.446 HOT PEPPERS 3CM
4712 0 98.958 HOT PEPPERS 3CM
4713 0 87.547 HOT PEPPERS 3CM
4714 0 85.068 HOT PEPPERS 3CM
6477 0 90.019 HOT PEPPERS 3CM
7289 90.990 HOT PEPPERS 3CM
7289 90.985 HOT PEPPERS 3CM
7759 94.000 HOT PEPPERS 2CM

rickhunter · « **Reply #9 on:** December 11, 2016, 10:00:53 AM »

You have Hot Peppers 3CM (3 coin multiplier). If you have the wrong reel chip, the game plays, but the symbols and the payouts will not match. The numbers next to the SS chip numbers denote the holdback, the higher the holdback, the looser the machine (pays more often).

http://www.newlifegames.net/igtbible/IGT%203CM/Game%20Library%20-%20S-Plus%20-%20Hot%20Peppers%20(3%20Coin%20Multiplier).htm

Based on the available chips, your most liberal chip would be SS4709. But any Hot Peppers 3CM chip would work.

NHBFan · « **Reply #10 on:** December 11, 2016, 10:38:27 AM »

Ok, now it is more or less clear
i need SP114 and SS 4709 (SS4710, SS4711) chips for correct working. Thank you alot for support and patience

Next question about fuses. I can see three fuses socets. Are they same amperage rate? If no, what fuse i have to put in each socets?

ianmcneil68 · « **Reply #11 on:** December 11, 2016, 03:37:51 PM »

From the top down the fuse amp ratings are 6A, 8A, 6A. Welcome to NLG!

rickhunter · « **Reply #12 on:** December 11, 2016, 06:42:58 PM »

Quote from: NHBFan on December 11, 2016, 10:38:27 AM

Ok, now it is more or less clear
i need SP114 and SS 4709 (SS4710, SS4711) chips for correct working. Thank you alot for support and patience

Next question about fuses. I can see three fuses socets. Are they same amperage rate? If no, what fuse i have to put in each socets?

SP114 is a really old chip. While you are at it, might as well upgrade the game chip to an SP1271 which is what most of us use now on the S+ for your game type.

jay · « **Reply #13 on:** December 11, 2016, 08:50:52 PM »

Starting from the top .....

Your machine is an S+ - the theme can be any available game
- it is simply changed by swapping the GAME and REEL chips. and using matching reel strips and glass.

You will want to pick a reel chip that matches the number of coins for your machine - then you can choose whatever payout %% you want. For home use we usually choose higher %%
The reel chip has a TYPE .... you then use a GAME chip that matches the TYPE.

Newer GAME chips have better options for hopper and credit and progressive jackpot settings.

NHBFan · « **Reply #14 on:** December 12, 2016, 02:44:46 AM »

Thanx for replies and advices guys!
good news i brobably able to fix my damaged SP chip. But if i can to do it is there a raeson to replace it with SP1271 new one?

If SS chip manages reels spins and wrong type of chip means uncorrect matches while gaming but what does SP chip manage?

jay · « **Reply #15 on:** December 12, 2016, 09:19:18 AM »

The reel chip controls the theme, number of coins, paytable etc.

The game chip controls machine function. For instance with older game chips the max hopper payout is controlled by a dip switch on the MPU board. Reel spin speed is another dip switch setting etc. There are many more options in a newer game chip that negates the use of dip switches and much more finer control over credit functions as well.

So NO you don't need to change, but probably worth changing.

If you are buying chips you will want to get a SET chip and a CLEAR chip as well. The clear is rarely used but the SET is needed to re-enable your bill validator after any kind of game change.

This includes changing the game chip.

NHBFan · « **Reply #16 on:** December 12, 2016, 10:28:38 AM »

Thank you jay!
SET chip is for bill validator only? I dont have bill acceptor

rickhunter · « **Reply #17 on:** December 12, 2016, 11:25:48 AM »

The SET chip is typically only used for enabling validator. So you probably won't need one.

NHBFan · « **Reply #18 on:** December 12, 2016, 12:01:10 PM »

another issue at the picture. i remove hoper and can see there are no fuses. Some wires connected each other. You can see orange-black and orange green wires connected directly.
to what fuse i need to connect this pair of wires? one more problem there is just one fuse cap. Is there a way to hold other two fuses?
Is this white socet at the picture is for power cord?

ianmcneil68 · « **Reply #19 on:** December 12, 2016, 12:26:49 PM »

Woah! Whatch out for old sparky! I am at work but I can take a look at one of my machines later if no one else chimes in.

News:

NLG Site Navigation Menu

Author Topic: S-Plus New Owner (Read 23613 times)