New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Multicade Boards - 48 in 1, 60 in 1, etc.  (Read 5967 times)

0 Members and 1 Guest are viewing this topic.

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Multicade Boards - 48 in 1, 60 in 1, etc.
« on: May 04, 2014, 07:46:36 PM »
Model: 48-in-1
Symptom: Dead. LEDs on the board flash in sequence.

Took the plastic top off the board to troubleshoot the CPU section. If the 74LV273 ICs and the audio DAC were tapped, the screen would go from blank to garbled and the audio would pop. Reflowed the solder on those SMT chips. Board would boot but had a "data error" on Arkanoid and would reboot if the board was tapped firmly.

Reflowed the solder on the SDRAM IC to fix the reboot. Entered the game's setup menu and turned off Arkanoid. This effectively turned the game into a 47-in-1.

The code for the games is kept in a surface mount flash ROM and is not easily fixed outside the factory. Turning off Arkanoid allowed the board to boot and the other 47 games to play.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #1 on: May 04, 2014, 07:46:54 PM »
Layout and Troubleshooting notes for 48-in-1 and 60-in-1 boards

These boards are almost identical under the plastic cover. They use different FPGA chips since the 60-in-1 also has connections (on later boards) for trackball controllers.

U31: CPU - Intel XScale LUPXA255A0C200
U49: SDRAM - 64 Megabit (8 Megabyte) - mfg varies
U19: Flash ROM - 32 Megabit (4 Megabyte) - mfg varies (Contains boot code? and game code?)
U8: EPROM - 256k x 16 bit - mfg varies - (Contains FPGA code?)

----------------

Audio:

U39: CT6630CR (48 in 1) - 16 bit audio DAC
U39: M6335G (60 in 1) - 16 bit audio DAC

These DAC chips feed a volume control and a TDA2003 audio output IC.

U39 is under the plastic cover.

----------------

Video:

U37 and U38 are 74LV273 chips. These and the surrounding resistors form the RGB video output section of the board. The resistors form an inexpensive "DAC" function on the outputs of the 273 chips.

U26 is a 74LV245 chip. This chip drives the video sync output.

Check these chips and the resistors if the video output is incorrect. They are located under the plastic cover.

----------------

If there is a corrupt game on the board it will stop booting and give an error screen. The fix is to turn off that game. Flip DIP switch 4 to get into the Setup Menu. Once there, on the first screen is the overall setup for the game. Keep moving down on the player 1 joystick to step through the games. Turn off the problematic game to skip it and its error.

----------------

These games ARE repairable as long as the CPU is OK.  The CPU is BGA mount and difficult to replace without specialized tools/training.

Spare SDRAM ICs can be found on cheap 64Mb PC-133 SDRAM DIMMs. The 74LV family of chips are 3.3v chips. Be sure to replace them with the same family of chips for proper operation.

The biggest problem I've seen on these boards is poor soldering. Reflowing the SDRAM, Flash ROM, and the video/audio SMT chips will fix a lot of intermittent problems.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #2 on: May 04, 2014, 07:47:04 PM »
Tip: Replacing that pesky cover...

When repairing the multicade boards that have the plastic cover over the CPU section of the board do NOT use RTV silicone. When RTV cures it leaches acetic acid which is a mild corrosive. Normally this wouldn't be a big deal except that there is no ventilation under the plastic cover so any fumes leached under it have no place to escape.

Use Rubber Cement or some other type of glue to hold it in place. Try not to use something that hardens as it will be difficult to clean up if you have to repair the board again in the future.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #3 on: May 04, 2014, 07:48:11 PM »
Quote from: Ken Layton
Several people have reported video sync problems on these boards. Most of the time I think they have the wiring in the cabinet wrong.

Poor video ground (wiring issue) will cause that. Also, these boards are pretty fragile. The outputs for sync are a simple 74LV245 in a VERY small SMT package. It doesn't have a huge amount of heat dissipation and isn't very hard to damage.

What makes it harder to repair is that these boards have a silly little plastic cover over that section of the board. You have to cut the melted pegs and remove the cover to work on it.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #4 on: May 04, 2014, 07:48:34 PM »
Model 48-in-1
Symptom: Runaway controls

The board would act like all the buttons for player 1 were randomly pressed. U29, a 74LS245, handles player 1 inputs and was shorted to ground on several inputs. RP26 tied 4 inputs high and the resistor on the Player 1 Start button was open. C64 was shorted. Replaced U29, RP26, and C64. Tested game.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #5 on: May 04, 2014, 07:48:44 PM »
Model: 60-in-1
Symptom: No sync

Replaced bad IC at U26 and tested.

This IC is a 3.3v 74LV245A and is under the plastic cover in the very center of the board.

NOTE: A 74LVT245A will work as a replacement IC.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #6 on: May 04, 2014, 07:48:55 PM »
Model: 60-in-1
Symptom: No blue on video

Replaced 6 blown resistors in the resistor ladder on the blue output. The 8.2k ohm resistor was still good. These are all VERY tiny surface mount resistors and are in this order for each of the color outputs:

102 (1k ohm)
241 (240 ohm)
471 (470 ohm)
102 (1k ohm)
202 (2k ohm)
392 (3.9k ohm)
822 (8.2k ohm)

Use a small chisel tip iron and liquid rosin flux when placing these resistors. It takes plenty of patience and a magnifying glass of some type.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #7 on: May 04, 2014, 07:49:06 PM »
Model: 48-in-1
Symptom: No sync

Replaced blown LV245 IC at U26. Tested.

*NOTE*: If the board is hooked up without the video ground connection then the risk of blowing this chip is much higher.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #8 on: May 04, 2014, 07:49:17 PM »
Model: 60-in-1
Symptom: No audio

Replaced a bad TDA2003 audio amp chip and a blown 240 ohm surface mount resistor. Tested board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #9 on: May 04, 2014, 07:49:32 PM »
Model: 36-in-1
Symptom: Will not move down

Board had a defective, missing solder joint on pin 3 of surface mount resistor pack RP26 from the factory. Resoldered connection and tested.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #10 on: August 02, 2016, 06:56:11 PM »
Model: 60-in-1
Symptom: Blue screen. Missing colors.

Replaced bad IC at U9, checked the resistor ladders on its output, and tested the game.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #11 on: August 02, 2016, 06:57:15 PM »
Model: 60-in-1
Symptom: Jittery screen and buzz in audio

Replaced 10uf cap at C80 and 2 470uf caps at C21 and C48. Reflowed badly cracked solder joints on the 3.3v regulator at U36. Tested.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #12 on: June 09, 2017, 09:47:02 PM »
Model: 2-to-1 JAMMA switcher
Symptom: missing colors and sound

Replaced bad chip at IC8 to restore colors. Replaced shorted relay at T1 to fix sound issue. Tested.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #13 on: July 04, 2017, 09:46:46 AM »
Model: 2-to-1 JAMMA switcher
Symptom: No Sync. Will not switch slots

Replaced bad chip at IC9 to restore sync. Replaced shorted relays at T1 and T2 to fix slot switching. Tested.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #14 on: August 13, 2017, 08:34:17 AM »
Model: 345-in-1 multicade
Symptom: Dead

Game is PC based with an odd sized power supply. Replaced bad power supply and tested.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2472
  • Reputation Power: 174
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: Multicade Boards - 48 in 1, 60 in 1, etc.
« Reply #15 on: December 21, 2018, 04:01:17 PM »
Model: 60-in-1
Symptom: No red or green on video out

Replaced a bad 74HC273 in the video output section and tested the game.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal