1
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing
« Last post by qbert on Today at 02:59:34 AM »Definitely a problem on the bottom mpu.
Is it a 500 series or 1270 board?
Is it a 500 series or 1270 board?
Welcome to the NewLifeGames.com message forum!
|
1
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by qbert on Today at 02:59:34 AM »Definitely a problem on the bottom mpu.
Is it a 500 series or 1270 board? 2
IGT S2000 and Vision Games / S2000 CPU missing -> what is needed?« Last post by Heikka on Today at 02:01:05 AM »Hi folks!
I just received 2x S2000 games and some parts (including CPUs) are missing. I wonder which CPU I need and which chips needs to be installed to it in order to get these working? Regard, Heikka 3
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: IGT G23 Game King 8.3R and OS Needed« Last post by MotoX on Today at 12:50:46 AM »I have B03 and B0C OS and 8.3R loaders. Is your other boot chip a show boot? PM me if interested. Hey, I couldn’t figure out how to PM you I’m interested in the OS, please message me, thanks. 4
Konami Reel Games / I have a advantage + machine need tito setup info« Last post by Coloradonewbie on Today at 12:45:41 AM »I have a advantage + machine need tito setup info
I have a clear card. Does anyone the setting I need 5
Aristocrat Video Gaming Machines / MK6 Call Attendant Coin Optic Fault« Last post by Daz_351 on Today at 12:37:36 AM »Hi Guys
Ive posted previously while ive been trying to fix my QLD converted to NSW pokie i purchased Mostly had a door mismatch error but ive slowly worked thru that and resolved it Moving forward i have a optic coin fault message now after moving thru the mismatch error so.... i purchased a working 2nd hand coin validator and swapped it over - same issue I then purchased another working MK6 main board and got given driver and comms boards All booted up fine after clearing ram and setting game options up but then i get exactly the same message call attendant optic coin fault I tried checking all the connections but its the last thing stopping the game from playing If you reset the fault it clears for a split second and says insert coins but then goes back to the fault I feel im getting so close but now stuck on this error I Want to say thanks to everyone todate that has helped me in the last couple months to help and communicate with me Appreciate it but if anyone has some tips for me to resolve this error please let me 6
IGT S2000 and Vision Games / Re: S2000 Vision Ms. Little Green Men startup issues« Last post by MB75 on Today at 12:13:36 AM »Thanks,
So the resistor could be broken as well. Yes im still busy with it Some other projects came along that needed attention first. Traces are ok if i measured them correctly but will check them ones again. Will take out the motherboard as well and check if there is something else going on. 7
IGT S and S-plus Reel Games / Unusual game it s plus« Last post by myplayroom on Yesterday at 11:48:12 PM »I just purchased a s plus intermediate game. It is a 5 line double diamond the jackpots are 400 400 400 400 and 1000. Here are the chips installed ss4456 and sp269. Any info on the chips and percentages.
8
Bally Alpha Reel Games / Re: Bally 9000 CPU No VGA Signal« Last post by RipMcKeyster on Yesterday at 10:17:51 PM »No discrete video card & I'll check the bios tomorrow. Thank you RH.
9
Bally Alpha Reel Games / Re: Bally 9000 CPU No VGA Signal« Last post by AcePeter on Yesterday at 10:12:49 PM »10
Bally Alpha Reel Games / Re: Bally 9000 CPU No VGA Signal« Last post by rickhunter on Yesterday at 10:00:35 PM »BIOS chip maybe bad? I'm assuming the mpu does not have a discrete video card.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |