New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: suvasam on September 12, 2017, 07:41:11 AM
-
ok got the chips maybe you can help tell me were they go here is a picture of my board thanks
-
your photos are not viewable, in my opinion photobucket is not the best way to post photos.
-
Can someone help him with this? I bought this software with some glass from a trusted NLG member as tested and working (I only needed the glass). I sold the software to this guy. I don't own a 3902 board so, where the chips go is beyond me. I only have 044 boards. Any assistance is appreciated.
Ian
-
Always make sure the notches are in the correct direction for all chips.
Just going on the assumption that the center picture is what you are converting to.
CG 1 and 2 goes under the sound board. The sockets should be labeled as CG1 and CG2
GME 1 and GME 2 goes in socket as labeled
PXLF 1 goes into socket labeled GME3
PXLF 2 goes into socket labeled GME4
Base goes in the base .. only one socket it will fit in.
Ask questions if needed before powering on.
I have noticed that the sound chips are not in the picture.
-
The sound chips were already in the board which is not pictured.
-
Thanks Ian .. I was going on the assumption that the center picture is what he had available for use.
suvasam .. you will need to change the multimedia board too .. and since they were already installed then they should be in the correct direction.
-
Thanks for your help, Ken!