New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: IGT touch pad repair need part number  (Read 1460 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim

  • 1-513-984-2201
  • Supporting Vendors
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2973
  • Reputation Power: 300
  • Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!Jim Is an-NLG GOD!
  • Gender: Male
  • NLG
IGT touch pad repair need part number
« on: March 27, 2017, 07:16:42 PM »
there are four/ six leg IC's  on the board, one for each quadrant,  they come off when trying to remove the touch pad from the glass!!  the only info on the chip is 2APD,   which doesn't cross over to anything.  does anyone know what type of device it is and where can I get some.  have alot of the touch pads with some missing,  want to repair them.  going to try my luck on SMD repair using hot air.  anyone know a good place to purchase the solder paste using in this process?

Thanks

Jim



Signature:
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma, Bally Alpha's , Williams-550, DOTS, BBU I don't have a WEB SITE, HOWEVER, I have hundreds of parts and reel strips and glass. If you need something, call or send me a pm. 

Offline Retro tech repair

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 849
  • Reputation Power: 81
  • Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.
  • NLG
Re: IGT touch pad repair need part number
« Reply #1 on: March 27, 2017, 10:26:50 PM »
I asked the same question a wile back did not get any answer. i have repaired quite a few of these boards by using doners. I am out of doners tho.

Offline cowboygames

  • If I'm Not Here, Check The Golf Course
  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2526
  • Reputation Power: 204
  • cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!
  • Gender: Male
  • You Can't Find a Better Friend Than a Dog
Re: IGT touch pad repair need part number
« Reply #2 on: March 27, 2017, 11:14:47 PM »
I may jave a couple donors Jim, let me know if you're interested

Offline Retro tech repair

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 849
  • Reputation Power: 81
  • Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.
  • NLG
Re: IGT touch pad repair need part number
« Reply #3 on: March 27, 2017, 11:50:36 PM »
Depending on the price if hes not interested i may be.

Offline Retro tech repair

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 849
  • Reputation Power: 81
  • Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.
  • NLG
Re: IGT touch pad repair need part number
« Reply #4 on: March 27, 2017, 11:58:33 PM »
By the way the ic is probably some form of touch sencor i think capacitive but i have not found one that matches.


Offline cowboygames

  • If I'm Not Here, Check The Golf Course
  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2526
  • Reputation Power: 204
  • cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!
  • Gender: Male
  • You Can't Find a Better Friend Than a Dog
Re: IGT touch pad repair need part number
« Reply #5 on: March 28, 2017, 12:45:58 AM »
I have 2 of unknown working condition, though they have all 4 IC's still mounted. Jim gets first shot, but a $10 donation to the site gets them shipped.

Offline Retro tech repair

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 849
  • Reputation Power: 81
  • Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.Retro tech repair Is a force to reckon with.
  • NLG
Re: IGT touch pad repair need part number
« Reply #6 on: March 28, 2017, 04:12:54 AM »
Yes of course he would. I was only saying if he didn't want them. Sorry if i seemed disrespectful.


Also i noticed i missed part of the original question. U had asked about soldering paste. I am by no means an expert so everything im about to say is just my experience. A special soldering paste is not really needed in this type of application. I have actually never used it. I think its for reballing bga chips or to apply solder to an entire board using a mask. During this process you will be adding flux as needed. I normally clean up the old soldier with a de soldering braid. you have to be very careful doing this you can easily lift traces off the board. do not drag accrost the board, and if at any point the braid gets stuck it's probably soldered to a pad or trace. Once the old solder is removed you can tin the pads using standard solder and flux. I recommend a leaded solder as it means you can use lower temperatures but use whatever your comfortable with. Then add the new part if you don't already know how to do this feel free to ask me questions. And one piece of advice on this specific board you should not need a pre heater. if you have one and want to use it start at a low temp. The first time i tried one of these boards i over heated it with my pre heat and the board got very dark not letting light through it. You can also over heat the board with just the hot air, but if you do the dark spot should be localized to where your working.

Offline cowboygames

  • If I'm Not Here, Check The Golf Course
  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2526
  • Reputation Power: 204
  • cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!cowboygames Is an-NLG GOD!
  • Gender: Male
  • You Can't Find a Better Friend Than a Dog
Re: IGT touch pad repair need part number
« Reply #7 on: March 28, 2017, 04:36:11 AM »
It's all good, just acknowledging what you'd already stated

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal