Yes I have them for sale as I specialize in these models exactly for your cabinet. I’ll send a pm and we can review it’s pretty straight forward swap no software or key chips required.

Reuse the 3 screws and 3 same plugs.

It is a Reel Power 25 game.  Variation can be 99, 1, 2, 3, 4.

I think I have what you need. Will check when I get home after 12 today

Hi,
I'm finally back after some health problems and as all is well I'm going to resume the post where I stopped, namely the change of the card to have the images from the LCD screen, the small board is now changed and I finally access the images, however I have new error messages that I didn't have before ☹
I obviously replaced the two button batteries on the MPU and on the video card that I had removed during my absence.
As a reminder, I have already repaired and completely restored many Bally machines but this IGT is my first and unfortunately I therefore have no spare parts to carry out tests if necessary.

The error messages are as follows:

•   CALL ATTENDANT
•   General Reel TILT
•   CLOSURE M

Sometimes the MPU lights are on and sometimes they are off
Thank you for your valuable help and any advice you can give me to finally get this machine working again.

Hello my 2 cents,,

I live in Bangkok, Thailand. I live local, among the Thai people. There is a Thai snooker center and there they have a :

1986 Casino Electronics horse racing game. They have a setup with a number of buttons where you place THB 10 coin bets on the odds for 2 horse combinations.
I Googled a bit more and it is the King Derby game. It is not in a professional game enclosure/box setup, but dismantled. Fantastic!

Below the button-board is a vault. The money drops into the vault and at the lower right in the vault is a wooden box where they pay out and drop the winnings.

I play there 2 times per week. Great simple fun.