New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: E2226-T Ballys reels don't stop at all  (Read 3320 times)

0 Members and 1 Guest are viewing this topic.

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
E2226-T Ballys reels don't stop at all
« on: February 02, 2018, 08:43:19 PM »
I picked up a Ballys E2226 Machine that looks awesome but doesn't play.  I turn it on put quarter in the wheels spin the insert coin and coin accepted lights are both on and wheels spin until they slow down.i can also pull again without putting any coins in. I ran the test mode 2 and heard 1401,1402,1403 all sound off. When i run test 8 with the door wide open it will stay at 80. If i close slightly it goes back to error 50 as if door is open.I also had an issue with the wheel stopping as soon as i pulled handle. I took the wheels out and changed the wheel reader on number 1. it seemed to solve that issue so i put original wheel reader back and i have not had any issues. i have another working E1XXX machine to reference to if i need. Any help would be awesome. I attached a photo. of what looks like 3 solenoids. Do these often go bad?
What are they used for?

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #1 on: February 02, 2018, 11:13:13 PM »
UPDATE: i took my other machine and took the wheel mechanism and i got the wheels to start and almost stop. I am getting error 43. I am not sure the wheels are spinning fast enough for it to stop. I changed the wheel reader 3 times with spares i have. How can i get the wheels to spin faster . The first 2 seem to spin fine but the 3rd is very sluggish.


Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E2226-T Ballys reels don't stop at all
« Reply #2 on: February 03, 2018, 05:38:00 AM »
You need to lube oil and clean the real machine

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #3 on: February 03, 2018, 10:20:28 AM »
What parts need to be lubed? can you illustrate?
when i spin the wheel with my fingers i can see the reel 3 only spins shortly while the other 2 spin on and on. I am not sure if take the reels off the spindle to clean or while they are on.
Can anyone elaborate?


Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E2226-T Ballys reels don't stop at all
« Reply #4 on: February 03, 2018, 12:32:27 PM »
All this little Hub in the center of the picture there is a small hole you will probably need some three-in-one oil oil all three of them and just spin them around and spin them around until they work really good there are also two black rods underneath that you need to make sure spin freely with all the parts attached to them the two black rods should spin around and around

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: E2226-T Ballys reels don't stop at all
« Reply #5 on: February 03, 2018, 12:40:17 PM »
Here are some more parts on the E-Series machine that need to be lubricated

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: E2226-T Ballys reels don't stop at all
« Reply #6 on: February 03, 2018, 02:59:07 PM »
Reels not stopping could also be a defective kick or arm switch on the side of the reel mech.
Test 2 and a manual reel spin will show the kick and arm switch codes, if one is not there then that switch is bad.
Let them that don't want any, have memories of not getting any.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #7 on: February 03, 2018, 03:29:00 PM »
Make sure nothing is interfering with the rotation of your 3rd reel. The assembly that stops your reels also needs to be  lubricated and greased. If you remove the reels assembly, then remove the reels. The top of the tall levers you will see a roller. That part is spring loaded and should move up and down. Lower below you should see 3 more rollers on shorter levers. Those kick or spin the reels. All those different pivot points need to move smoothly and freely. The lower links need to be greased. Once this has been done the reels should work better.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline Badbaud

  • Topic Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3557
  • Reputation Power: 304
  • Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!Badbaud Is an-NLG GOD!
  • (shop) klar.slotrepair@gmail.com
Re: E2226-T Ballys reels don't stop at all
« Reply #8 on: February 03, 2018, 07:11:15 PM »
Correction, test 3 not 2.

"Reels not stopping could also be a defective kick or arm switch on the side of the reel mech.
Test 2 and a manual reel spin will show the kick and arm switch codes, if one is not there then that switch is bad."
Let them that don't want any, have memories of not getting any.

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #9 on: February 03, 2018, 10:08:33 PM »
took off the wheels and they spin awesome now.Wehn i put quarter in and pull the wheel they all spin . but wheel 1 and 2 now stop and the same time giving new error of 42. i switched wheel reeder 1 and 2 and have the same error 42. Any suggestions?


Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #10 on: February 03, 2018, 10:35:25 PM »
UPDATE::: seems like what ever i did helped. now i deposit a quarter the wheel spin and the machine pays out. i played about 20 times or so but every so often i would get either error 42 or 43. i would reset and would play for another 20+ spins before it happens. Do you think i need to adjust the wheel readers?
 Can it be because the door handle and gears maybe a little dry on grease and the wheels don't spin super fast


Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #11 on: February 03, 2018, 11:25:28 PM »
The plate that rides between the reel readers is not to be centered. You want to have it closer to the left side inside edge of the reel reader without touching. You might want to try cleaning the sensor holes inside the reel readers with a q-tip. If you continue to have problems with the reel readers causing error codes, I can rebuild them for you. I have new infrared transmitter and the photo transistor eyes. Then I test then in my reel reader Tester to check for any low reading on each sensor. Try cleaning and adjusting them first.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #12 on: February 04, 2018, 11:22:02 AM »
i cleaned the wheel reeder and i also moved it closer. i am still having issues with wheels 2 and 3 stopping together.
i just bought all 3 wheel reeders on ebay so i assuming they are good. i also swapped them out with each other.

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #13 on: February 04, 2018, 11:33:53 AM »
i just switched wheel reeder 1 with wheel reeder 3 and i am still having issues with wheel 3. I assume since i did not have any issues with wheel reeder 1 that i am not having wheel reeder issues. it must be something else. Any suggestions how i should work backwards to fix this issue? I will be able to get 10-20 spins before wheel error 43 appears. could it be something to do with wheel speed?

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #14 on: February 04, 2018, 01:23:09 PM »
The game does know what RPM that the reels are spinning. So if your still having a problem with a slower 3rd reel, then the machine will throw the error massage.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline Akriegs

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 69
  • Reputation Power: 6
  • Akriegs New User has no influence.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #15 on: February 07, 2018, 06:26:12 PM »
I am going to grease up all the handle area this weekend to see if it makes a difference. I am also looking for a door lock for Ballys E -series. Does anyone have 1 for sale? I will take 2 if you have more than 1?
Does anyone know the length of the shaft needed for the door?







Offline GOS

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1120
  • Reputation Power: 84
  • GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.GOS Is a force to reckon with.
  • NLG
Re: E2226-T Ballys reels don't stop at all
« Reply #16 on: February 07, 2018, 07:34:37 PM »
PM SENT

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal