1
IGT S and S-plus Reel Games / Re: IGT Double diamond need some help
« Last post by David Walz on Today at 02:32:00 PM »Photos
Welcome to the NewLifeGames.com message forum!
|
1
IGT S and S-plus Reel Games / Re: IGT Double diamond need some help« Last post by David Walz on Today at 02:32:00 PM »Photos
2
IGT S and S-plus Reel Games / Re: IGT Double diamond need some help« Last post by David Walz on Today at 02:29:24 PM »Photos
3
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display« Last post by marcbollinger on Today at 02:18:55 PM »Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.Can't do that - DVI has to be primary TOP screen. Run top to DVI, curve to DP. Curve screen is not primary, Top screen is primary on a curve machine, bottom screen is primary on all other setups. The reason top is primary on curve is because you can't program machine on the curve monitor. Gotcha, I'll give it a shot. 4
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display« Last post by sixcardmark on Today at 02:07:14 PM »Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.Can't do that - DVI has to be primary TOP screen. Run top to DVI, curve to DP. Curve screen is not primary, Top screen is primary on a curve machine, bottom screen is primary on all other setups. The reason top is primary on curve is because you can't program machine on the curve monitor. 5
**Reel Gaming Machines** **General Chat** / Re: Machine never stops spinning.« Last post by RichardK on Today at 01:47:42 PM »Never mind, your method works again, I'm loving this and glad I gambled on it!! Thank you so much again
6
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display« Last post by marcbollinger on Today at 01:38:04 PM »Tried hooking the Curve monitor directly into the DVI port on the A2 cpu, but this causes ONLY the Curve monitor to display, the top monitor times out.
7
**Reel Gaming Machines** **General Chat** / Re: Machine never stops spinning.« Last post by RichardK on Today at 01:34:10 PM »Thank you!
Another topic, of course just "won" $10 but not enough in the hopper, I've used the reset key but it still won't let me continue and keeps saying call attendant 8
**Reel Gaming Machines** **General Chat** / Re: Machine never stops spinning.« Last post by sixcardmark on Today at 01:06:33 PM »Try this: turn machine on and if reels are slowly turning, open door and turn the JP reset key one time and close the door.
9
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display« Last post by marcbollinger on Today at 01:06:05 PM »Do you have a DVI cable to try for the primary (top) monitor. I have never tried to use the DP port for primary. Yeah, it's got a DP->DVI converter on it, I'll try a direct plugin to the DVI port and see what happens. 10
Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. / Re: Bally A2 Curve - Can't Get Code Red on Curve Display« Last post by sixcardmark on Today at 01:03:35 PM »Do you have a DVI cable to try for the primary (top) monitor. I have never tried to use the DP port for primary.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |