New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: slotdoofus on August 12, 2016, 04:56:50 AM

Title: S2000 Replace Ballast and F14T8 with LED
Post by: slotdoofus on August 12, 2016, 04:56:50 AM

Is there a LED replacement for the topper. It normally takes a F14T8

Title: Re: S2000 Replace Ballast and F14T8 with LED
Post by: cowboygames on August 12, 2016, 06:23:15 AM

If it's the same as the other tubes on an S2000, not home to check, should use same as LED's for top, reel and belly lights

Title: Re: S2000 Replace Ballast and F14T8 with LED
Post by: qbert on August 12, 2016, 06:49:41 AM

I believe they are a little shorter than the reel or belly

Title: Re: S2000 Replace Ballast and F14T8 with LED
Post by: brianfink on August 12, 2016, 07:19:06 AM

I'm pretty shore mine has a round bulb the same as a 17" round top gameking.

Title: Re: S2000 Replace Ballast and F14T8 with LED
Post by: cowboygames on August 12, 2016, 07:43:19 AM

Not positive, but I think you can shorten those aftermarket LED's commonly used on these machines

Title: Re: S2000 Replace Ballast and F14T8 with LED
Post by: Jim on August 12, 2016, 08:03:59 PM

got a group of machines from a Casino, they used  strips of LEDS  and tapped directly into the 13 vdc  available.   they just taped the strips to the bulb.  see pictures.   last picture is what it looked like with the glass in it.