New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => SIGMA Video Games => Topic started by: BEAVE on August 18, 2020, 01:11:52 PM
-
I need to know how to program the settings on my PT-2B machine. I posted a picture of the settings video but you can only change a couple different things here. I need to change the SW1 switches to the "on" position on 4 & 7 to make the bill validator enabled. I have a picture below of the video settings page. Can someone lend me a hand here please.
-
On your main board there will be a bank on dip-switches or an uplopulated spot where dip-switches should go labeled S/W 1 the you can solder in a wire or flip the switch to the ON position in order to turn the settings on or off.