New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT AVP (Including G20,G23) => Topic started by: Hertz14 on May 18, 2021, 10:07:08 PM

Title: Anyone ever come across this?
Post by: Hertz14 on May 18, 2021, 10:07:08 PM

Saying mass storage jumper isn’t present. Running a SSD, 4gb of ram. Machine has been off for about a week, now this error. Sorry it’s sideways, phone does that when I reduce the file size.

Title: Re: Anyone ever come across this?
Post by: rickhunter on May 18, 2021, 10:44:24 PM

Power off, flip the little silver switch next to the USB ports where you insert ekey.

Title: Re: Anyone ever come across this?
Post by: Hertz14 on May 19, 2021, 03:01:45 AM

Switch is already in the up position.


Cycled to see if that made a difference. Still the same. I’m going to test the switch with a ohm meter and if that checks out, try a clear.

Title: Re: Anyone ever come across this?
Post by: millionaire2k on May 19, 2021, 11:34:38 AM

I got this error when I had the silver switch down by mistake.  It was solved by turning the machine off and then flipping the switch back up.  If you're still getting the error maybe your switch is bad or something related to it.

Title: Re: Anyone ever come across this?
Post by: Hertz14 on May 19, 2021, 11:49:30 AM

Quote from: millionaire2k on May 19, 2021, 11:34:38 AM

I got this error when I had the silver switch down by mistake.  It was solved by turning the machine off and then flipping the switch back up.  If you're still getting the error maybe your switch is bad or something related to it.

I thought the same, gonna pull the box out and ohm it out. Easier than clearing and enabling all of the poker games again. I also reseated the ribbon thinking that could’ve been it.


Strange that the switch would fail without being touched. I’m wondering if the ssd might have failed. To me that’s more likely than an untouched switch.

Title: Re: Anyone ever come across this?
Post by: Hertz14 on May 19, 2021, 02:06:58 PM

Can someone tell me if the switch up is closed or open? Either way, I’m not getting continuity between the top and bottom terminal leads on the back of the switch. I’m wondering if I could solder in a bypass?

Title: Re: Anyone ever come across this?
Post by: sixcardmark on May 19, 2021, 02:19:49 PM

Go for it, no need to have it turned off.

Title: Re: Anyone ever come across this?
Post by: Stayouttadabunker on May 19, 2021, 03:18:10 PM

Turning the attendant key doesn't do anything?
That is what the red screen is saying to do?

Title: Re: Anyone ever come across this?
Post by: Hertz14 on May 19, 2021, 04:06:45 PM

It would go into a loop. I did a clear and that fixed it. Now I’m trying to identify the game(s) that maybe caused the issue. Or it was a fluke.