New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT AVP (Including G20,G23) => Topic started by: TopDogElec on February 24, 2022, 07:30:03 AM
-
What harness do I need for a G23 for the MEI cashflow? I've been told that it was a JCM iVizion installed previously and only some of the wires were hooked up. It was just the frame, no head/transport or cash can. I took out the iVizion frame and put in the MEI frame upside down, everything seems to line up correctly even though the bill head is upside down, will that work like that? I hooked up what would fit but I'm lost and afraid to power it up until I know for sure I did it right but it doesn't look right to me and just want to make sure.
-
What mei head are you using. The G23's use a USB based head.
-
It is a cashflow model scn6607 (RS232), I also have a scm612UE (USB) and a sc6602 floating around. Not sure if any of them are flashed for IGT though
-
6607's don't work with IGT. Not sure if 6602's work either. Both my AVP machines have a 6612U.
-
6602 downstacker works with G23 however if you’re using TITO tickets it must be inserted upside down. Bills are supported all 4 ways so no worries there (assuming good options during flash)
6612 is the upstacker model is ideal for G23 as it can also handle bills the same and the sensor is in the opposite location for TITO tickets inserting right side up
Advance Heads can read both ways assuming correct model
I have a bunch of MEI BV in both models laying around I can spare
-
6607's don't work with IGT. Not sure if 6602's work either. Both my AVP machines have a 6612U.
6602's will work but with barcode reading upside down (ticket facing down)
I could have sworn I have flashed 6607's to use in a 6602 application but now I am questioning myself.
-
If anyone has any extra MEI cards and wire harnesses for these please pm me I’ll buy them