New Life Games LLC
**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: chedderboy on February 26, 2023, 03:38:26 PM
-
I bought a beautiful Bally 873 Golden Nugget from a seller in AZ and had it delivered to my son out that way. It was playing great yesterday, but today will not coin in. The coins fall back into the money bowel. Machine powers on and manually coined in will play but not pay out. Winner paid light seems to stay on. From what I gather, the machine has been sitting a lot and was last serviced a few years. The plan was to wait for the machine to come back during summer or winter break, but the boys want to play it while it’s there. Any ideas for a quick fix?
-
winner light on and game not paying is probably the payout counter not resetting. May also want to check the horizontal switch in front of the payout counter spiral cam to make sure it's clean and closing when the payout counter is not reset. A jumper wire to short the switch closed can be used to check it.
coin lockout coil not working could be a dirty/misadjusted switch or a plug connection. Quick hack is to remove the coin mech and put a piece of tape on the back so the lockout armature tab can't poke into the mech after the mech is reinstalled.
both problems could go away if you remove/reinstall the reel mech and hopper a few times. If ya want to be more thorough, remove the hopper and reel mechs and scrub off the plug pins with a wire brush, synthetic steel wool, metal cleaning pad, etc. to remove any surface oxidation. Cleaning in the sockets is harder without the right shaped tools so don't bother unless there's obvious a lot of crud in them that doesn't scrape off after a few insert/remove cycles.