New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: dutonP 1955 on May 03, 2023, 12:57:50 PM
-
Hi I am wondering I anyone can tell me what to do as far as the wiring goes in a igts2000 second generation slotmachine I have a igts2000 Triple Double Butterfly sevens multi 9 line 3 reel 5c sing denomination slotmachine and the reason of me letting you know what model it is because its always helpful for you to know. anyway there some wires in my slotmachine I'm questionable about that what goes were and I dont want to fry anything so just looking for a little help and guidance thanks dutonp1955.
-
I am not a S2000 guy (mostly older stuff) but there are almost always a lot of wires with some going no where as components like player tracking systems, progressive displays, and door monitoring systems have been pulled.
SO.... if you have a question about something in particular - may I suggest you take a picture, edit it up (ie draw a circle around what you are curious about) - then post the picture.
Note If your using a cell phone many take pictures of such size they can't be uploaded but if you mail them to yourself your given an option to reduce size - then you can post the smaller pic.
-
What is your machine doing or not doing? No one will be able to help you unless we know what problems you are having.
-
Your Bally post was removed. Please put that in the BALLY section:
https://newlifegames.com/nlg/index.php?board=75.0
From HERE ON, this subject is about your wiring issue in the IGT S2000.
As Jay and Erbs asked... please post a photo of the wiring issues and describe what the problem is.
-
Hi erbs I am just mainly needing guidance on how and where to hook up some wires one of the two sets of wires going from the cpu and the board on the left side corner are two orange two pin wires I don't know where they go and I also spotted a couple of wires that are red and the other wire is black and has a jumper to it on the wire harness going from my cpu dont really know what it hooks to once a person removes the jumper plug and there is a two pin wire harness with two wires the green wire hooks to the cpu and the black wire on the same two pin goes to the back left side corner of
the slot machine and has a J9 and on the same harness hook up there's a 12 is there a way you can guide me through this? And I was also wondering if I could give you my cell number and I can send you the pictures and if you dont mind posting them for me please that's great because I'm not very tech savvy thanks I'd greatly appreciate it dutonp1955
-
dutonP 1955:
You must learn to be a little "tech savvy," otherwise you really shouldn't own a slot machine, unless you want to call a slot tech out each time there's an issue, and that's going to be quite costly. $$$
This IS the reason Newlifegames exists, so that the experts here can help you to fix the machine. :yes:
With that said, you must become more proficient using your phone or computer. It's far easier to use a desktop, laptop, or iPad at least.
To post photos:
1. E mail the photos to yourself. Make sure they are under 1MB in size, but not too small.
2. Click MODIFY on your post.
3. Just below the dialog box, you will see Attachments and other options. Click it.
4. That will open a "drop down" menu and you'll see, in red - Attach:
5. Just below the Attach button, click the Choose File box and add your photo.
6. Once you add your photo or photos, click SAVE which is at the bottom right side. You can also do a spell check. :yes:
Once you do this a few times, you will become MUCH better navigating this and other web forums. :propeller: