First - please do NOT use offsite image hosting. The photos will disappear over time. Please use the NLG attachment bar.

It's a software issue. Most of the members here are from the USA but we do have a couple of Canadian members. I'll reach out to them and hopefully they're reply here.

Thank you! I'd love to get bills working as I can only put two quarters at a time to pull and cannot "load up" tokens.

Thank you for the information.   The battery on the backplane had 0.5V on it.  I have replaced it and now need to look to get a clear card.

Which OS card is in machine?  That will tell which clear card you need.

Hi all,

I've been a member for a bit, and I've usually been able to find answers to my questions by reading through the forums.

I'm working on my first Bally, it's an S9000 Stepper Elite. I've changed out both power supplies changed one of the batteries (I wasn't aware there are multiple until I began reading through multiple posts).

Everything begins to boot, and I eventually get to a dark screen that is blue and the message displayed is faded, and then goes black with a gray box, and another message appears.

I've gathered that I need to clear it, but having a hard time finding what I need and unsure what will work and what will not.

I've attached pictures of the OS card, game card, and photos of the messages that display. If any other photos are needed, let me know.

https://drive.google.com/drive/folders/1SfpNlyF2CTOu2rcOsXfPB67b-8fSuQ_8

Any and all help is greatly appreciated!

Hello!
Thanks for your awesome setup guide!
Do you know to do this on any other base os exept the international one?

Best regards

This is original fully working 3902